Martin® Return Roller Guard0 pages
TECHNICAL DATA SHEET
Martin® Return Roller
Guard
The Martin® Return Roller Guard is designed to prevent a
worker from being drawn into a return roller. Martin® Return
Roller Guards are an economical way to improve safety
awareness and reduce worker injuries.
The guards should be installed on return rollers that are
less than 7 ft high or within reach of workers. For return
rollers that are higher than 7 ft and out of reach of workers
Martin® Return Roller Baskets can be used. The combination of guards and baskets provides a systematic approach
to conveyor guarding that is easy to use and safety compliant.
BENEFITS
Improves Safety
RRG X XX X X
NOMENCLATURE
P/N Prefix
CEMA Series of Roller
Belt Width (inches)
Stringer
Color/Material
Solid upper portion of panel provides pinch point protection while the slotted lower portion allows for inspection while keeping workers protected from rolls.
Simple Installation
Brackets are included to mount basket directly to either
the side or bottom of the stringer.
Universal Design
Guards are designed to fit all major roll manufacturers’
sizes (CEMA C, D, & E).
CEMA SERIES OF
ROLLER
D: CEMA Series D
E: CEMA Series E
Easy Access
STRINGER
Quick-release pins allow easy access; side and bottom
panels swing open for cleanout or maintenance. Removable end plates provide access to roller bearings.
COLOR/MATERIAL
O: Martin® Orange
C: 304 Stainless Steel
S: 316 Stainless Steel
S: Standard Base
W: Wide Base
APPLICATION NOTES
RRGD-XXXX assemblies will fit all CEMA C or D 4”, 5” & 6”
return rollers with 4-1/2” drop brackets only. RRGD-XXXX is
available in standard and wide base belt widths 18” thru 72”.
RRGE-XXXX assemblies will fit all CEMA E 6” & 7” return
rollers with 7” drop brackets only. RRGE-XXXX is available in
standard and wide base belt widths 36” thru 96”.
Martin Engineering USA
One Martin Place
Neponset, IL 61345-9766 USA
800 544 2947 or 309 852 2384
Fax 800 814 1553
www.martin-eng.com
Form No. L8888-88/11 L3914-08/12
Form No.
© Martin Engineering Company 1944, 2011 2012
© Martin Engineering Company