Martin® Air Cannon Controller - Single Circuit0 pages
TECHNICAL DATA SHEET
Martin® Air Cannon
Controller - single circuit
The Martin® Air Cannon Controller - single circuit controls one
solenoid for air cannon operations or pneumatic vibration applications. The timer is a repeat cycle with adjustable ON time
and OFF time.
BENEFITS
•t
Precision Flow Management
Provides automatic cycle function for pneumatic solenoid.
•tFlexible
Cycle can be manually operated from outside the enclosure.
ON/OFF times can be adjusted from .1 seconds to 6 hours.
•t
Indoor or Outdoor Use
Standard NEMA 4X Enclosure is water-tight/dust-tight/
corrosion-resistant.
•t
Easy to Install
Connect to your electric supply, wire the solenoids, and
set ON/OFF times. Also available with 20 Amp output relay.
•t
Simple to Use
No programming required, just set times for T1 and T2
(ON/OFF) timers.
ORDER INFORMATION
Martin® Air Cannon Controller - single circuit
P/N 38902
Martin Air Cannon Controller - single circuit
with 20 Amp output relay
P/N 38902-20
®
TIME RANGES
Time Range
Selector
Scale
Time Range
0–1
0.3 sec to 10 sec
1S
10S
0.1 sec to 1 sec
10M
15 sec to 10 min
120/240 VAC, Single Phase 50/60 Hz
1S
0.1 sec to 6 sec
120V 5 Amps
10S
1.3 sec to 60 sec
SPECIFICATIONS
Electrical Requirements
Power Consumption
240V 3 Amps
Single
Output
Service Temperature Range
Timing Range
1M
14° to 122°F (-10° to 50°C)
10M
15 sec to 60 min
1H
7.5 min to 6 hours
.1 second to 6 hours
0–6
7.5 sec to 1 min
Martin Engineering USA
One Martin Place
Neponset, IL 61345-9766 USA
800 544 2947 or 309 852 2384
Fax 800 814 1553
www.martin-eng.com
Form No. L3880-08/12
© Martin Engineering Company 2011, 2012