Martin® Air Cleaner0 pages

TECHNICAL DATA SHEET

Martin® Air Cleaner
with PowerCore® Filter
Overview
To overcome the maintenance problems and operating
costs of centralized dust control systems, Martin Engineering recommends the use of the Martin® Air Cleaner
with PowerCore® Filter on conveyor transfer points.
Rather than carry dust-laden air to a central collector, air
cleaning systems filter the air inside the transfer point.
There is no large fan, no ductwork, and no central bag
house. Air cleaning filters are integrated into the transfer
point enclosure, where they can easily return the filter
dust as agglomerated material to the conveying system.
Air Cleaners can effectively handle the heavy concentrations of dust and volumes of air arising at belt conveyor
transfer points.
High efficiency filters remove 99.99 percent of all particles larger than 0.5 micron.
Systems To Fit Your Application
Martin Engineering offers a full range of system sizes
and filter materials to match application requirements.
Explosion-proof models are also available for use in
explosive environments.

Benefits
Effective Dust Capture

The Martin® Air Cleaner with PowerCore® Filter is designed to
remove 99.99 percent by weight of all dry particulate particles
0.5 micron and larger in size.
(This efficiency is based on a time-weighted average and assurances the air
cleaner will be installed, operated, and maintained in accordance with instructions.)

Continuous Operation

Automatic “reverse jet” cleaning sequence keeps filters working effectively with minimum compressed air.

Returns Product To The Process

Dust stays within the transfer point. Valuable material returns
to the material handling system.

System Requirements

Low Energy Costs

Compressed Air: 10.2 cfm @ 90-100 psi
Electrical: 230/460V 3-Phase 60Hz
(also available in 380V/50Hz)
Max. Operating Temperature: 150°F (66°C)

Economical Installation

Small, efficient integral fan operates only when conveyor runs.

Replacement Filters
Standard:tt
Explosion-Proof:t

P/N 38432-FP
P/N 38432-FPE

No ductwork to install, balance, or clean.

No Dust Disposal

No haulage costs for waste disposal. Valuable material returns
to the process. No equipment needed to handle, package, or
dispose of dust.

Compact Design

Small “footprint” reduces space requirements and installation
cost.

Minimum Maintenance
The Martin Air Cleaner is not designed for use with the
following materials:
®

Gypsum
Alumina
Salts
Potash

Soda Ash
Hydrated Lime
Urea
Powder River Basin Coal

“Clean side” access for inspection and filter changeout. No
tools required to change filter.

Flexible Design

Stand-alone system or use to supplement existing central dust
collector systems.

Easy Access

Large side or top door allows for easy access for inspection
and filter changeout.

Form No. L3906-02/14
© Martin Engineering Company 2012, 2014