LOADING
Piezoresistive OEM Pressure Transducers0 pages
نسخه متنی
"
"
KELLER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Piezoresistive OEM Pressure Transducers WITH LASER WELDED MEDIA ISOLATION DIAPHRAGM | Series 3 L to 10 L | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Series 3L...10L, a new range of transducers that benefit from smaller capsule dimensions and crevice free diaphragms. KELLER has developed a new technique for laser welding very thin stainless steel media isolation diaphragms. The smaller crevice free transducers still retain all the traditional performance, stability, and quality, for which KELLER is renowned. Each transducer is supplied with a calibration sheet indicating sensitivity, linearity, zero offset, temperature errors and the compensation resistors to substantially reduce zero offset and zero temperature errors. The transducers are designed for floating O-ring seal mounting, this avoids housing induced stress, and guarantees the performance over pressure and temperature as tested in our automatic test chambers. Each transducer comprises of a piezoresistive silicon chip mounted on a glass-metal feed-through header welded into a stainless steel housing and filled with silicone oil, the very thin laser welded stainless steel isolation diaphragm completes the front side. Media pressure is transferred from the stainless steel isolation diaphragm, via the oil inside the cell, to the silicon measuring chip. With the laser welded technology, transducers having diameters as low as 9,5 mm can be reaͭlised. Diameter is to some extent dependent upon the pressure range measured, low pressures require larger diameters, higher pressures can be achieved with smaller diameters. This is due to the expansion of the oil under temperature that creates an internal pressure due to the resistance of the diaphragm. The smaller the diameter, the higher the internal pressure and the more difficult is the zero compensation. | c a e | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 L / 4 L / 5 L | 6 L | 7 L | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PD-9 L | 8 L | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The list below shows the dimensions of the standard types of the Series L transducers and the pressure ranges, in which they meet the specifications on the reverse of this leaflet. The higher length for high pressure transducers is given by the required thickness of the glass feedthrough to withstand the pressures. | PD-10 L | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Housing Diaphragm Oil Ceramic Laser Weld | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Measuring Cell Glass Feedthrough | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject to alterations | 02/2009 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KELLER AG fur Druckmesstechnik KELLER Ges. fur Druckmesstechnik mbH | St. Gallerstrasse 119 Schwarzwaldstrasse 17 | CH-8404 Winterthur D-79798 Jestetten | Tel. +41 (0)52 - 235 25 25 Tel. +49 (0)7745 - 9214 - 0 | Fax +41 (0)52 - 235 25 00 Fax +49 (0)7745 - 9214 - 60 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Companies approved to ISO 9001 | www.keller-druck.com |