Data Sheet Mano Gauge / Record / Cali0 pages
NTELLIGENT
nnD nnIGITAL
nnM nnANOMETERS
nnM nnANO
nnG nnAUGE
nn/ M nnANO
nnR nnECORD
nnM nnANO
nnC nnALI
This is a highly accurate microprocessor-controlled pressure measuring instrument. SensoBrain >
TM , a KELLER-designed low power signalprocessor, transmits the signals of the pressure- and temperature sensor to the microprocessor, which digitally compensates the sensor data.This mathematical modelling of the pressure sensor virtually eliminates all errors over a wide temperature range. All KELLER- and KAVLICO-sensors are compatible with the electronics of the Intelligent Manometers. >
M
nnANO
nnG
nnAUGE (Basic Version)Display of:Pressure, Pressure Unit, Temperature, Elapsed TimeAlternative:Pressure, Pressure Unit, Max.- and Min. Value
All functions are executed with the front key of the instrument. It allows the display to be set to zero and to change the measuring cycle for prolonged battery life.
Two pressure sensors can be connected to the M >
ANO G >
AUGE (optional).Analog outputs can be provided 420 mA or 0Ņ10 V (optional). >
M
nnANO
nnR
nnECORD (M >
ANO G >
AUGE plus data recording)Based on the M >
ANO G >
AUGE ,the M >
ANO R >
ECORD records and stores the measured values. The front key is used to select which data shall be displayed and stored, and to set the recording interval and the number of readings (memory for 960 or optionally 8100 readings). The read-out of the stored data is via RS 232 serial interface (Logger Software and K101 cable available as option). >
M
nnANO
nnC
nnALI (C >
ALIBRATOR V >
ERSION plus data recording)In the basic mode, the M >
ANO C >
ALI displays: Pressure, Pressure Unit, Max.- and Min. Values.Units are selected via the front key (bar, PSI, kPa, MPa,). M >
ANO C >
ALI also incorporates thefunctions TARA (sets a new temporary zero reference), LEAK (measures a pressure change
over a programmable time) and RES (reduces the standard resolution by factor 10). A seperate HOLD-key on the instrument freezes the reading. This instrument has the same
data recording features as the M >
ANO R >
ECORD . >
HOLD-Key(Mano Calionly) KELLER KELLER KELLER Front KeyButton 80 mm 80 mm Ÿ 45G 1/4" HEX 27G 1/4"HEX 19G 1/4"
76 mm 46 mm Integrated Capacitive Cell(30 mbar1 bar)Series 11 Transducer(1腅10 bar / -12 bar / -1Ņ1000 bar)Series 6 Transducer(10600 bar) Subject to alterations KELLER AG fżr Druckmesstechnik St. Gallerstrasse 119CH-8404 WinterthurTel. 052 - 235 25 25Fax 052 - 235 25 00 KELLER Gesellschaft fr Druckmesstechnik mbH Schwarzwaldstrasse 17D-79798 JestettenTel. 07745 - 9214 - 0Fax 07745 - 9214 - 50 Companies approved to ISO 9001 / EN 290012/00 www.keller-druck.com size="-3">