عضویت 
ورود اعضا
راهنمای خرید
Cutter Head with Integral Swivel0 pages
Upsize Tooling - Integral Bearing Swivel Cutter
Part No. FA44634F (11” OD), FA44723F (16” OD HD)
• Designed For Hard Ground Conditions Leading
The Auger/Thrust Casings •
• Keeps Pilot Tubes Stationary While Cutter Bit Rotates •
• Sized To Match Product Pipe Diameter •
FEATURES
• The swivel cutter head is the upsizing tool between the pilot tube adapter and the lead thrust casing for
hard ground conditions.
• Cutter head allows pilot tubes to remain stationary while the cutting teeth rotate through ground at a full
12.5” (318 mm) OD for the 11” OD head or 17.5” (445 mm) OD for the 16” OD swivel cutter head.
• Cutter head equipped with fluid ports at the cutter bit reducing cutting torque through lubrication.
• Spoils removed using standard Akkerman augers and casings.
• No external swivel necessary.
• Internal bearings are serviceable for extended life.
Swivel filled with Mobil 636 Gear oil ONLY. DO NOT USE GREASE!
SPECIFICATIONS
Swivel
Dimensions (width x length)
11” OD ...... 12.5” OD x 43” (318 x 1,092 mm)
16” OD HD..17.5” OD x 43” (444 x 1,092 mm)
Weight (approx.)
11” OD .................................. 700 lbs. (318 kg)
16” OD HD ........................ 1,200 lbs. (544 kg)
Thrust Capacity
11” OD
Working Continuous Load ................ 35 Ton
Maximum Intermittent Load ............. 70 Ton
16” OD HD (heavy duty)
Working Continuous Load ................ 50 Ton
Maximum Intermittent Load ........... 100 Ton
34
GBM_SwivelCutterHd, FA44634F
