1077 Milliamp Transducer Simulator Data Sheet0 pages
Time Electronics
1077 Milliamp Transducer Simulator
SOFTWARE
• 3 operating modes
• Accuracy 0.02%
• 100mA source and load
• 24V line mode
• Variable drive source 14 to 40V
• Safety terminals
• Removable protective cover
• Supplied with rechargeable batteries
• 10 hours typical use between charges
• Optional carry case
DESCRIPTION
A multi-purpose handheld test instrument that can be used as an adjustable current load, adjustable power
supply, or precision current source. The 1077 is commonly used for the testing and simulation of milliamp
transducer systems. Compact and rugged design make the 1077 ideal for use in both the lab and field.
With a protective rubber cover to increase durability, the instrument can withstand arduous use and is well
suited to process control applications.
Three Operating Modes:
1) As an adjustable current load (simulating the transducer) on the line, the 1077 will draw up to 100mA from
the line. The required current is set by the front panel controls.
2) As an adjustable power supply (14V to 40V) with accurate measurement and display of the current drawn
from the circuit.
3) As a precision current source with 14V to 40V maximum (adjustable) drive capacity. The 1077 will source
the set current up to 100mA to the loop.
Safety Terminals: Fitted as standard and fully compatible with 4mm shrouded plugs, as well as standard
plugs, bare wires, and spade terminals.
Added Protection: The 1077 comes fitted with an ergonomic rubber cover providing increased protection
and durability. It has a textured grip for comfortable handling and openings at the top and bottom to allow
access to the battery meter and a position to place labels if required. It is easy to remove if the user prefers
a stand-alone unit or to house the 1077 in the optional 9027 carry case.
PORTABLE OPERATION
Rechargeable batteries and mains charger are supplied with the unit as standard.
Complete recharge time is 10 to 12 hours although sufficient charge for a few hours
operation can be obtained with only 30 minutes charge. Full charge allows 10 hours
typical use. The battery condition monitored by a meter on the top of the 1077.
www.timeelectronics.com
"