7064 High Pressure Calibrator0 pages
Time Electronics
7064 Pneumatic High Pressure Calibrator Module
• 35, 70, 100, and 200bar versions available
• Best accuracy 0.04% of full scale
• Pneumatic with regulator
• Calibrate gauges, transmitters, sensors
• 4.5 digit display
• 5 selectable pressure units
• Over-pressure alarm
• RS-232 serial interface
• EasyCal software compatible
DESCRIPTION
The 7064 is a high pressure calibration and control module designed for applications up to 200bar. It is fitted with a self-relieving
regulator, two needle valves and a dual function front panel pressure port for precision output and measurement. There are four
available versions according to required output range, either 35, 70, 100, or 200bar.
The 7064 combines high accuracy with simple operation and is suitable for high volume work in process plants, offshore platforms,
refineries, and many other on-site testing facilities. It is ideal for calibration and maintenance of pressure gauges, sensors, transmitters,
transducers, indicators, switches, and more.
Features include a 4.5 digit LCD display, 5 pressure units, zeroing switch, regulated output as well as pressure measurement input.
Basic accuracy is 0.04% of full scale. Line pressure is supplied via an input minimess port fitted on the rear of the console. The front
panel output and measurement port is also high pressure minimess type.
The module is fitted as standard with an RS-232 interface which is accessible on the rear of the CalBench console or internally
connected to a 7051 calibrator/control centre. This enables communication and read back with EasyCal calibration software (supplied
as standard with the 7051 multifunction calibrator/control centre module). With EasyCal the user can define and perform pressure
calibration procedures as well as create and print traceable calibration certificates.
SPECIFICATIONS
Specifications are for 1 year at 23ºC ±5ºC. Accuracy includes linearity and long term effects.
All accuracies are ±1 digit. For operation outside specified temperature range, apply 70ppm per °C
Range (bar)
0 to 35
0 to 70
0 to 100
0 to 200
Accuracy (% of fs)
0.04
0.04
0.04
0.1
Resolution (bar)
0.01
0.01
0.01
0.01
Units..................................................... bar, PSI, MPa, kg/cm2, Atm
Maximum Line Pressure...................... 230bar
Sensor.................................................. Piezo-resistive - stainless steel diaphragm
Over Pressure Warning........................ 1.2 x range full scale - audio and visual (on LCD) warning
Fittings.................................................. Minimess
Rear Connections................................ Minimess
Interface............................................... RS-232 for readback (using EasyCal on 7051 if ordered)
Module Width....................................... 200mm (primary or secondary console fitting)
ORDERING INFORMATION
7064..................................................... High Pressure Calibrator Module (+ pressure range code shown below)
Range (bar)
35
70
100
200
Option Code
7105
7106
7107
7108
ECFLA.................................................. EasyCal Calibration Software. See separate datasheet for further information.
C178..................................................... Factory Calibration Certificate (NPL traceable)
C190..................................................... UKAS Calibration Certificate (ISO 17025)
Due to continuous development Time Electronics reserves
the right to change specifications without prior notice.
Time Electronics Ltd, Unit 11 Sovereign Way, Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. United Kingdom.
T: +44 (0) 1732 355993 F: +44 (0) 1732 770312 E: mail@timeelectronics.co.uk W: www.timeelectronics.com
v1b 4/3/13
"