HMI Touch Screen Options for SMLC0 pages
HMI Touch Screen
for SMLC
www.ormec.com/Products/HMI
MMI-8000 Series Touch Screens
The SMLC interfaces with
ORMEC’s MMI-8000 series of flat
panel touch screens. Five options are
available which have diagonal screen
sizes of 4.3”, 7.0”, 10.4”, 12.1” and 15”.
These screens are color TFT LCD
displays.
Displays present machine
functions such as:
setup
maintenance
product run changes
operational status
operational control
fault conditions
ORMEC's touch screen operator interfaces provide a fully graphical, easy-to- use human-machine interface.
These easy-to-use graphical
operator displays provide alerts for
Operation
machine alarms and status conditions
Communication with an ORMEC
to set values for motion parameters,
Operator control can be built into
SMLC is through Ethernet using
triggering motions from the motion
the MMI-8000 representing a
Modbus/TCP.
table, jogging the motor, homing the
conventional factory operator panel,
Screen objects are assigned to
motor, turning on drive outputs,
without additional bulky hardware, I/O
input and output registers that are
clearing fault conditions, and more.
modules and wiring.
mapped to input and output variables
Each individual display can be
in the application program running on
designed and built quickly using the
the controller. They can also be used
“drag and drop” graphical objects
found in the EasyBuilder 8000
application development utility.
Ordering Guide
The HMI panels have onboard non-volatile memory and
Operator Interface Terminals
an optional flash memory card.
MMI-8050*
4.3" diagonal, 480w x 272h pix els, TFT Color, Ethernet
These are used for storage and
retrieval of both machine set-up
MMI-8070*
7.0" diagonal, 800w x 480h pix els, TFT Color, Ethernet
parameters and product recipes.
MMI-8100*
10.4" diagonal, 800w x 480h pix els, TFT Color, Ethernet
Each MMI-8000 unit is
MMI-8121
12.1" diagonal, 800w x 600h pix els, TFT Color, Ethernet
shipped with EasyBuilder 8000
MMI-8150
15.0" diagonal, 1024w x 768h pix els, TFT Color, Ethernet
development software. The
latest version of the EasyBuilder
Each Operato r Interface unit includes EasyB uilder 8000 develo pment so ftware and Ethernet cro sso ver cable.
8000 software is available for
* 1 x 9 wide screen fo rmat.
6
download from the ORMEC web
site, www.ormec.com
Ethernet Cables and Accessories
CBL-SMLC-MMI8/X
Serial Cable, SMLC to MMI-8000, RS-232, x ft.
EISK5-100T
Ethernet Sw itch, 100BASET, 5 port, 24 VDC input, DIN rail mount
CBL-ENET/x
Cable, Ethernet, RJ45,3,7,10,25,50,75, & 100 ft
CBL-ENETX/x
Cable, Ethernet, crossov er, RJ45, 3,7,10 & 25 ft
Development Software
Easy Builder 8000 included and dow nloadable.
ORMEC Systems Corp. | 19 Linden Park | Rochester, NY 14625 | phone (585) 385-3520 |www.ormec.com