I/O Options for SMLC (WAGO)0 pages
I/O Options
for SMLC
www.ormec.com/Products/IO
SMLC Machine I/O Options
WAGO Ethernet and Profibus DP I/O
feature a wide variety of analog and
digital I/O modules that reliably
interface the ServoWire Motion &
Logic Controller (SMLC) to industrial
devices such as switches, sensors,
solenoids, valves and motor starters.
WAGO I/O uses either an Ethernet or
Profibus DP Fieldbus Coupler for each
node, which is connected to DIN rail
mounted I/O modules. Appropriate
modules (AC In/Out, DC In/Out,
sinking/sourcing, analog
current/voltage, etc.) can be selected
for specific applications.
The WAGO Fieldbus Couplers are
compact, flexible, high-performance
processors that provide the interface
between the I/O modules and either a
Profibus DP or dedicated Ethernet
network. DIN rail mounted modules
provide an efficient method for
mounting that minimizes panel space.
The 24 VDC digital input modules
include built-in noise filters, available
with either a 3.0 or 0.2 msec time
constant. The AC digital output
modules utilize zero voltage turn-on
and zero current turn-off of the load to
greatly reduce generated EMI and
RFI, and feature an internal dv/dt
snubber network for protection from
voltage transients on the line. All
digital I/O modules feature internal
LED indicators and digital output
modules include electronic shortcircuit protection.
The analog input modules are
available with 12 or 16-bit resolution,
and support a variety of input signal
current and voltage levels, including 020 mA, 4-20 mA, +/-10 V and 0-10V.
Analog input modules are also
available for use as interfaces to
thermocouples, RTD sensors and
resistor bridges. The analog output
modules are 12-bit, and also support a
variety of signal types.
WAGO I/O: At A Glance
Standard Connectivity Solutions – WAGO Ethernet and Profibus
DP I/O provide standard connectivity solutions for interfacing digital
and analog I/O to the ServoWire Motion & Logic Controllers (SMLCs)
that is easy to implement, operate and maintain.
Flexible Interface – All WAGO I/O modules connect to the SMLC
using a Fieldbus Coupler, one per rack. The Fieldbus Coupler
interfaces to the Ethernet or Profibus DP network providing a highspeed connection to all I/O in the rack. I/O can be remotely
distributed throughout the machine.
Quick and Reliable Installation – Each module incorporates CAGE
CLAMP connection system for vibration-proof, fast and maintenancefree wiring with test points for easy access to signals with wiring in
place.
Digital I/O Modules – WAGO I/O provides a full line of digital I/O
modules. DC inputs (5 & 24 VDC), DC outputs (5 & 24 VDC), AC
inputs (80 to 230 VAC) and AC outputs (60 to 230 VAC) provide
flexible interface options. Digital modules feature compact 2, 4 and 8
channel designs.
Analog I/O Modules – Analog voltage inputs range from 0 to 10
volts, +/- 10 volts, and 4-20 mA. Analog output modules provide 0 to
10 volts, +/- 10 volts ranges. Analog input modules are available as
efficient 2-channel devices. Interface to temperature sensors, load
cells, dancer control systems, and other industrial analog voltage or
current control points.
Minimum Panel Space – Compact 12 mm (0.47 in) and 24 mm
(0.94 in) wide, DIN rail mounted module designs allow the OEM
designer to use a minimum amount of panel space.
Specialty modules are available with
up/down counters, incremental
encoder interfaces, SSI interfaces
and more.
The I/O modules are color coded by
function and provide a high degree
of isolation and noise immunity
between the motion controller and
external components. Optional
labeling components are available
to clearly indicate I/O point number,
power and ground connections for
easier installation and maintenance.
ORMEC Systems Corp. | 19 Linden Park | Rochester, NY 14625 | phone (585) 385-3520 | www.ormec.com
"