M-Series Motors0 pages
M-Series Servo Motors
AC Brushless Servo Motors
ORMEC's M-series AC brushless servo
motors provide high torque-to-inertia
ratios and excellent continuous torque
and peak torque performance. With a
compact design, these industrialquality servo motors incorporate high
performance neodymium magnets and
a highly efficient stator winding
design. This provides excellent power
density.
The M-series servo motors
completely eliminate brush wear
maintenance problems and feature
extremely durable construction. They
include heavy duty bearings.
Rugged MS connectors provide
reliable interconnections to motors and
optical encoders.
Features
ORMEC’s M-series servo motors offer continuous stall torques from 1.4
to 845 in-lb (0.16 to 95 N-m)
Motor/Drive Combinations
Continuous stall torques from 1.4
to 845 in-lb (0.16 to 95 N-m)
High peak torques from 4.4 to
2413 in-lb (0.5 to 273 N-m)
Output power from 50 to 15,000
watts (0.07 to 20 HP)
High maximum speeds from
2,000 to 5,000 RPM
200 VAC and 400 VAC operation
UL approved and CE marked
Incremental encoder resolutions up
to 24,000 counts per revolution
Class F insulation over Class B
temperature rise provides
additional thermal headroom for
longer winding life under rated
operating conditions
Minimum torque ripple & cogging
for smooth low-speed performance
Totally Enclosed Non-ventilated
(TENV) standard IP-65 (except
shaft opening). Shaft oil seal is
optional
Optional fail-safe holding brakes
The performance of these servo
motors is a direct function of the factorymatched servo motor/drive combination.
ORMEC's drives provide software
controlled all-digital performance for
consistent operation that totally
eliminates analog potentiometer
adjustments. High bandwidth operation
and a quality high resolution encoder
provide the response and accuracy for
demanding applications. Peak torques
up to three times the rated torque are
available for a few seconds, allowing the
motor/drive to handle high inertial loads
and heavy duty cycle requirements.
Each drive's motor parameters are
software configurable for high
performance and RMS current limiting.
.
Index
Motor Model Numbers
Motor Power Ratings
200 VAC Motor Specifications
400 VAC Motor Specifications
Motors w/failsafe brake
Specifications
Motor Outline Drawings
Cable Model Numbers
Cables for XD Indexer Drives
Cables for S2D Drives
Cable Drawings
ORMEC Systems Corp. | 19 Linden Park | Rochester, NY 14625 | phone (585) 385-3520 | www.ormec.com
page 1
2
3
4
12
18
19
25
26
27
28