Bartlett-Snow? parts and service0 pages
steam PRODUCT SOLUTIONS
Thermal Processing
Bartlett-Snow™ Parts and Service
With more than 125
years of experience,
Alstom thermal products
have successfully provided
solutions in heat transfer
applications for industries
worldwide.
OEM Replacement Parts & Service
Alstom has the solution for your Bartlett-Snow replacement part needs. You will have
fewer problems, less downtime, and higher productivity when staying with the OEM.
Our replacement parts are manufactured to the identical standards as the original parts
by utilizing the same drawings and specifications. These drawings specify the exact
metallurgical compositions, fit tolerances, lubrications requirements, and other critical
details for the manufacture of a quality replacement part.
advantages
•tOn-time delivery
•tInventory management
program
•tOEM reliability
•tCustomer confidence
•tISO 9001:2008 Certified
Cylinders
Bartlett-Snow is the source for replacement cylinders fabricated
from basic carbon steel through exotic high temperature and
corrosion resistant alloys. The cylinders can be manufactured by
use of rolled plate, molds for centrifugal and static castings, or
dies for hot isostatically pressed extrusions.
Riding Rings
TPWR/PRSHT/TPBSPS/EN/1.2014/USA/1975
Riding ring replacements of forged high carbon steel alloy are
provided with straight or taper sided configurations. At the time
of riding ring replacement, it is also recommended that
mounting hardware, consisting of the wedge, pads, or chairs
be replaced in order to ensure the riding rings are properly
mounted and run true with respect to each other.
Trunnion Rolls, Shafts and Bearings
Replacement trunnion rolls are manufactured from forged high
carbon steel alloys with heat treated tread surfaces. Trunnion
roll and shaft assemblies can be provided with flanges for units
not featuring thrust rolls.
Thrust Rolls, Shafts and Bearings
Replacement straight or tapered sided thrust rolls are
supplied in forged high carbon steel alloys with heat treated
tread surfaces. The thrust rolls can be provided for units
requiring either roller bearings or bronze bushings.
Girt Gears, Girt Sprockets and Pinions
Girt gear replacements are provided in forged or cast iron high
carbon steel alloys, one piece or split, with surface or through
hardening as required. The drive pinion should also be changed
to provide for proper meshing between the girt gear and pinion.
For chain drive units, girt sprockets are manufactured from
carbon steel plate and in split construction.
© ALSTOM 2013. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it
is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is
subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited.
Alstom contributes to the protection of the environment. This leaflet is printed on environmentally-friendly paper.