LR-Cal LPP 30 Pressure Test Pump (-0.95...+35 bar)0 pages
Calibration Test Pump LPP 30 (pneumatic) LPP 30
Pressure-/Vacuum-generation !28 in Hg...+500 psi
DRUCK & TEMPERATUR Leitenberger GmbH
Bahnhofstr. 33 C D-72138 Kirchentellinsfurt C Germany
Tel.: +49-7121-90920-0 C Fax: +49-7121-90920-99
E-Mail: DT-Export@Leitenberger.de C http://www.druck-temperatur.de
Technische Änderungen vorbehalten. Freibleibend C (Rel. 101006) • All technical modifications reserved. Without engagement
Calibration Test Pump LPP 30, pneumatic operated
to generate pressure up to +35 bar / +500 PSI
switchable to generate vacuum up to -0.95 bar / -28 inHg
The Calibration Test Pump LPP 30 is used to generate
pressures and vacuum for checking, adjusting and calibrating
mechanical and electronic pressure measuring instruments
by comparative measurements. These pressure tests may be
carried out in laboratories, workshop or on site at the
measuring point. If the instrument under test and a sufficiently
accurate reference measuring instrument (e.g. Electronic
Pressure Calibrator LPC 300 or LPC 200, ±0.025% FS) are
connected to the LPP 30, the same pressure / vacuum is applied to the two
instruments when the pump is operated.
Despite its compact dimensions, the calibration test pump LPP 30 is easy to
operate and allows for exact generation of the required test pressures. A changeover
switch enables the generation of vacuum as well. The LPP 30 is fitted with a
fine adjustment valve for the precise adjustment of pressures. The reference instrument is screwed directly
on to the top of the pump and the unit under test is connected by means of a connection tube incorporating
an adapter 1/4" BSP rotating female (or 1/4" NPT female) port.
Specification:
Pressure generation: 0...35 bar = 0...500 PSI (or equivalent), switchable to
Vacuum generation: 0...!0,95 bar = 0...-28 inHG (or equivalent)
Pressure ports: 1/2" BSP female rotating (with seal) for reference instrument on the top of the pump
(Type LPP-30-N14: 1/4" NPT female, type LPP-30-G14: 1/4" BSP female rotating)
1/4" BSP female for unit under test (at connection tube)
(Type LPP-30-N14: 1/4" NPT female)
Volume per stroke: appr. 11 cm³
Materials: anodized aluminum, brass, ABS
Fine adjustment: Fine adjustment valve
Dimension: appr. 220 x 105 x 63 mm
Weight: appr. 510 g
Included in standard supply:
• Calibration test pump LPP 30
• Connection tube with 1/4" BSP female rotating port
• Operating manual
Optional accessories:
• Set of adapters and seals for unit under test
• Rigid plastic case with foams
Recommended Reference Instruments:
• Accuracy ±0.025% FS: Electronic Process Calibrator LPC 300 (see sep. datasheet)
• Accuracy up to ±0.025% FS: Electronic Pressure Calibrator LPC 200 (see sep. datasheet)
• Accuracy ±0.050% FS: Electronic Pressure Calibrator TLDMM (see sep. datasheet)
• Accuracy ±0.1% FS: Digital Test Pressure Gauge TLDMM-A01 (see sep. datasheet)
• Accuracy ±0.2% FS: Digital Test Pressure Gauge TLDMM-A02 (see sep. datasheet)
• Accuracy ±0.25% FS: Digital Test Pressure Gauge LDM70-E25 (see sep. datasheet)
• Accuracy ±0.5% FS: Digital Test Pressure Gauge LDM70-K50 (see sep. datasheet)
• Accuracy ±1.0% FS: Analogue Pressure Gauge LPP-MANO (see back page)