3onedata | CAN to fiber optic converter | MC2010 pages
Your Serial and Data Communications Expert
3onedata
> > RS232/RS485/422 converters
CAN Bus to optic fiber converter
30ne data
MC201
Features
1 .Support CAN2.0A and CAN2.0B protocol, conform to the ISO/DIS 11898
2.Integrate 1 UTD CAN interface and 1 optical interface
3.CAN interface supports auto-detect baud rate and user-defined
baud rate, the baud rate matches the range of 2.5k~lMbps
4.Support optic fiber transmit CAN network data
5.Extend transmission distance to 15 KM
6.CAN interface has electrical isolation protection with 2KVAC
isolation voltage; Supports 8KV ESD protection(air discharge)
7.Port Data Throughput: lOOOfps
8.Optional installation of external termination resistors
9.Industrial design, IP40 protection
10. Support DIN-Rail and wall mounting installation
11.Working Temperature: -40-85 °C
A ^3 cc c§>
Introduction
MC201 is a CAN bus to fiber converter. It designs specially to
deal with the short transmission distance of CAN bus, the subjection
to electromagnetic interference and other issues. CAN bus transfer to
fiber is able to provide the user with transparent data transmission of
CAN bus to fiber. It is working in pairs, is more convenient to put the
CAN signal revert to the CAN signal through fiber transmission.
MC201 serial converter integrates an optical interface and a
2KVAC electrically isolated CAN bus interface, is able to
receive/store/transmit different rates between 2 CAN network data.
CAN bus interface of MC201 supports various of standard
communication baud rate recommended by CiA, is capable for
Dimensions
detecting and matching automatical baud rate and defining baud rate
by user, the baud rate ranges from 2.5Kbps to 1Mbps; it can connect
external termination resistors at the same time.Its single-model fiber
interface can be used in high-interference environment and has
concentrated energy , which is more suitable for long-distance
transmission , is better to extend the network communication
distance.
MC201 adopts EMC protection design, supports wall and panel
mounting. It can be used at the harsh environment from -40 °C to
85 °C.
Unit (mm)
m DSD
®
0
-89-
22t
rt
@
jonedaia
E-mail:sales@3onedata.com http://www.3onedata.com
"