1 Port RS-232/485/422 to Ethernet Serial Device Server(10/100M)0 pages
Serial Device Servers
NP301
1 Port RS-232/485/422 to Ethernet Serial Device Server(10/100M)
Features
1.
Adopt 32 bit ARM processor
2.
Support 3-in-1 RS-232/RS-485/RS-422 serial interface
3.
Support 10/100M
4.
Support 300bps-115.2Kbps
5.
Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol
6.
Support across gateway, router communication
7.
Support standard TCP/IP SOCKET
8.
Support Windows serial interface driver mode
9.
Support Virtual serial driver access and auto connect once the network disconnect
10.
Support network and serial interface configuration mode
11.
Low consumption design
12.
Support DIN-Rail or wall mounting installation
13.
Working temperature: -4075℃
Introduction
NP301 serial device server is designed to make your serial
What's more, NP301 serial devices server provides powerful
devices internet ready instantly. It provides 1 port RS232/485/422
management configuration tools based on Windows, guiding users’
(RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port
configuration of the devices step by step. All configurations can be
10/100Base-T(X).It makes them ideal choice for connecting decentral
done by network and serial port, supporting communication across
serial devices and Host computer to an IP based Ethernet, making it
gateway and router. In addition, it allows users to configurate flexibly
easily and conviniently for your management. Its software can be
IP address, Server or Client mode, size of packet, etc.
setting and updating by serial program group in the application. It
NP301 serial device sever is designed with EMC protection, and
supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM,
power supply have overcurrent and overvoltage protection. These
LLF functions.
make it woking stably in hazardous environment.
Easy wall and DIN-Rail mounting.
Specification
LAN:
RS-485 signal: D+A,D-(B),GND
Standard: 10Base-T100Base-TX
Parity bit: None,Even,Odd,Space,Mark
Protocol: Support
Data bit: 5bit,6bit,7bit,8bit
TCP, UDP, APR, ICMP and DHCP protocol
Signal: Rx+,Rx-,Tx+,Tx-
Baud rate: 300bps115200bps
Speed: 10/100Mbps
Flow control: RTS/CTS or XON/XOFF
Working: Full-duplex and half-duplex
Direction control: RS485 side adopt ADDC technology, auto text and
Working mode: Support Server and Client
control data transfer direction
Transmission; 100m
Loading: RS-485/422 side support 32 nodes (customize 128 nodes)
Protection: 1.5KV ESD
loopback
Connector: RJ45
Transmission: RS-485/422 side 1200M, RS-232 port 15M
Serial Interface:
Interface protection: 1500W surge protection, 15KV static protection
Serial interface number: 1 port RS-232,1 port RS-422/485
Interface type: RS-232 side DB9 maleRS-485/422 side 5 bit terminal
RS-232 signal: TXD,RXD,RTS,CTS,DTR,DSR,GND
block
RS-422 signal: T+A,T-(B),R+(A),R-(B),GND
1
"