18 port 10/100M Managed PoE Switch | 16 ports PoE 300W | ES5018-16POE-300W0 pages
Power over Ethernet switches
ES5018G-2GS-16POE-300W-P(220VAC)
18*10/100/1000M Base-T PORTS POE SWITCH
Features
1. Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W)
2. Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs)
3. Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging
other private standard POE devices or devices without POE function
4. Support port power supply prioritization, guarantee the continuous power supply of key nodes
5.Up to 100m network cable transmitting distance
6.Built-in PSE power supply module, plug-and play design, easy to install
7. High security performance defending against power surge
8.Support short-circuit protection function
9.Energy-saving green design, support auto-switch to standby mode and auto-detect cable length.
10.Support simple WEB management, easy to configure the functions of switches
Introduction
ES5018G-2GS-16POE-300W-P(220VAC) is Managed PoE
With ES5018G-2GS-16POE-300W-P(220VAC) PoE Switches,
switches support both 10/100M ports and 10/100/1000M ports. All of
you are free to position equipments wherever they should be and
the copper ports of the ES5018G-2GS-16POE-150W-P(220VAC)
power to the unit with the data over the Ethernet cable, not being
provide PoE Power Injector function,complying with IEEE 802.3at
limited by the power outlet. You can remotely reboot the device
compliant powered devices with maximum up to 30 watts of power
without having to climb up to or go to the device - just remove its
per port. The Switches also come with 2 SFP slots expanding your
Ethernet cable from the switch end as adopting PoE. All ports
network flexibly. In addition, it provides high performance,
ES5018G-2GS-16POE-300W-P(220VAC)
enterprise-level QoS, advanced security strategies. With all these
auto-sensing that make each port only provide power as detecting the
advanced features, the PoE Switch are ideal choice for small and
presence of 802.3af /at PoE supported devices.
PoE
Switches
are
medium business networking.
Specification
Technology:
Ports:
Standard and Protocols: IEEE 802.3af, Power Over Ethernet, IEEE
Fixed ports: 14*10/100M PoE ports+2*10/100/1000M PoE ports+2*
802.3at, Power Over Ethernet Plus
IEEE 802.3u, 100BASE-TX, IEEE 802.3ab, 1000 BASE-T, IEEE
802.3z, 1000 BASE-X, IEEE 802.3ad, Static or Dynamic Link
Aggregation, IEEE 802.3x, Full-Duplex Flow Control, IEEE 802.3az,
Gigabit SFP ports
PoE Pin-out: 1/2(+), 3/6(-); Customized 4/5(+),7/8(-)
Exchange Properties:
EEE(Energy Efficient Ethernet), IEEE 802.1q, VLAN
100M forwarding rate: 1488095pps
IEEE 802.1p, QoS/CoS, IEEE 802.1d, STP(Spanning Tree Protocol),
100M forwarding rate: 148809pps
IEEE 802.1w, Rapid Spanning Tree Protocol
10M forwarding rate: 14880pps
POE Standard: IEEE802.3af/at
Flow control: Back-pressure traffic control under Half-Duplex mode
IEEE 802.3x traffic control under Full-Duplex mode
1
Transmit type: Full wire-speed storage and forwarding
MAC address: 16K, Support auto-update, two-way learning