FE1 Optic Fiber Modem: MODEL73020 pages
E1/Ethernet/V.35 Converters
MODEL7302
FE1 Optic Fiber Modem
Features
1. Conforms to all relevant ITU series standards( ITU-T G.703 G.704 G.823)
2. Framing or non-framing mode in option
3. E1 time slot in arbitrary option
4. Balanced 120Ω/non-balanced 75Ω interfaces automatic
5. Support the loop back of local analog/digital interface
6. Support remote loop back function (valid on under framing mode)
7. Support pseudo-random code test function, providing convenience for the test of optic fiber line status
8. 120km trunking -free transmission distance for single-mode optic fiber
9. Capable to be communicated with V.35 fiber modem
10. Available with complete line detection and alarm indications
11. Available with independent structure and 19-inch frame-mounted structure (frame-mounted structure can be inserted with 16 modules);
12. AC 220V and DC –48V inputs may be selected for fiber optic modems of both structures;
13. For frame-mounted fiber optic modems, dual power supply heat backup is provided to ensure a Receiving level0~-43db
Introduction
MODEL7302 FE1 Fiber Modem is a high-performance E1 fiber
into a framing or non-framing E1 data signal. E1 interface may be
optic modem developed by using a dedicated integrated circuit. It is
directly connected with the E1 interfaces of image and data terminals
to modulate a framing or non-framing E1 data signal directly into
or the WAN ports of MUX, exchanger and router for a dedicated
single- or multi-mode optic fiber for a transmission via optic cable
network setup or a LAN connection.
line. At another end of the optic cable, optical signal is demodulated
Specification
Optic interface:
To indicate the operating status of power supply, loopback and
Line mode type: CMI
random code test, code missing alarm, out-of-frame alarm etc.
Line mode rate: 2.048Mbps
Structure:
Operating wavelength: 850nm,1310nm or 1550nm
Independent: 140mm(depth) × 210mm(width) x 42mm(height)
Optic fiber connector: SC/PC
Frame-mounted: 19in 4.5U standard casing
Applicable optic fiber: multi-mode, single-mode
Power supply:
Transmission distance: Single-mode:up to 120km
Independent: 85V264V AC input, 5V/2A output;
Multi-mode: up to 2km
E1 interface:
StandardITU-T G.703 G.704
-36V-72V DC input, 5V/2A output
Frame-mounted: 150V260V AC input, 5V/16A ,12V/1A output
-38V -58V DC input, 5V/16A ,12V/1A output
Frame structureframing CCS(PCM31)/ CAS(PCM30)
Power consumption: 3W
RateN×64Kbps (N=1~31)or 2.048Mbps
Operating temperature: 0°C50°C
Impedance: 75Ω, physical interface BNC;
Storage temperature: -20°C80°C
120Ω, physical interface RJ45
Humidity: 5%90% (free of condensate)
Code:HDB3
Warranty: 5 years
Receiving level: 0~-43db
Approvals: FCC, CE, RoHS approvals
Indicator lamps:
1
"