Operation manual E0 pages

E
Pulsarlube E Grease Selection Guidelines
Grease
Cost Eective, User Friendly Automatic Single Point Lubricator
USER MANUAL
Grease Type
Description
Specifications
PL1
Multi Purpose
High performance NLGI #2 grade
PL2
Heavy Duty
Excellent heavy duty NLGI #2 with high viscosity base fluids and additional load carrying capacity
Specifications
PL3
High Speed
High performance NLGI #1 grade
Grease Capacity
60, 120, 240cc
PL4
H1 Food Grade
USDA H1 NLGI #2 grade for applications where food grade product is required
Max Operating Pressure
5kgf/㎠ (70psi)
PL5
High Temperature
Synthetic high performance NLGI #2 grade with oxidation stability
Operating Temp Range
PL6
Multi Purpose MoS2
Dark gray colored MoS2 containing mineral based product fortified extreme pressure property
PL7
Low Temperature
Fully synthetic product for extreme low temperature applications
Description
-20˚C ~ 55˚C (-4˚F ~ 131˚F )
Product Size
60cc : Ø77mm (3.03") × 92mm (3.62")
120cc: Ø77mm (3.03") × 112mm (4.41")
240cc: Ø77mm (3.03") × 157mm (6.18")
Weight
60cc : 245g (0.54lb) 120cc: 305g (0.67lb)
240cc: 432g (0.95lb)
OEM filling is available upon request under special terms and conditions. Please contact your local distributor for more information.
Installation Thread Size
How to Dispose
1/4" Male NPT & BSPT compatible
Nitrogen (N2) Gas
Gas Type
2
Available Dispensing Periods
4
3
4
1, 3, 6, 9 & 12 months
Certifications / IP code
1
CE / ATEX / UL / IP68
Up to 1m (3ft) using a 8mm (5/16") O.D.
pre-filled lube line
Remote Installation
Technical information is subject to change without prior notice.
Models
/
PULSARLUBE E60/120/240, 60/120/240cc Grease Lubricator
1. Turn the housing cap counterclockwise and unscrew the top to remove the battery cover.
Dispose of used battery pack conforming to local regulations.
2. Using a hand tool such as screw driver, detach the PCB (Printed Circuit Board) from the used unit.
Dispose of the PCB conforming to local regulations.
3. Dispose of remaining plastic components in a designated area. Comply with local regulations for recycling.
Before Use
Thank you for purchasing the Pulsarlube E. To ensure the safe operation and proper installation of the Pulsarlube E unit,
we strongly recommend that you read the following information carefully before use. If you require further information,
please contact your local supplier or manufacturer.
Product Certifications
Product Details
4. Do not cut or puncture a used unit to avoid any potential personal injury or hazards.
Certifications
Shelf Life and Warranty Period
Housing Cap
The shelf life of each Pulsarlube E unit is 1 year from the date of production. Product warranty is limited to original defects in material and workmanship
and will not cover any collateral damage due to mishandling, abuse and /or any other inappropriate use of this product.
Warranty period is 1 year from the date of purchase.
How to Order
E60 / PL1
E120 / PL2
E240 / PL3
Grease Type
Lubricator Model (Pulsarlube E, E60: 60cc, E120: 120cc, E240: 240cc Capacity)
Battery Cover
Battery
Mode Selector
PCB
N₂ Gas
Generation Cell
Piston
Lubricant
Reservoir
Grease
IECEx
0344
ATEX
ll 1 G Ex ia llC T4 Ga
INERIS 12ATEX0062X
-20℃≤Ta≤+55℃
Ex ia llC T4
12-KB2BO-0283X
-20℃≤Ta≤+55℃
KCs
UL
Warning
C
Protector
www.pulsarlube.com / info@pulsarlube.com
Doc No. 1122-000 REV. 130103
EN 60079-0:2009
EN 60079-11:2007
EN 60079-26:2007
US LISTED
4UX9
Description
Manufacturer /
Address
Product Description
Pulsarlube USA, Inc.
IEC 60079-0:2007-10
IEC 60079-11:2006
· Potential electrostatic charging hazard.
· The cleaning from the PULSARLUBE shall be done with a wet cloth.
· Do not change inside Batteries.
Base
1/4" NPT/BSPT
Compatible Thread
4312 Di Paolo Center, Glenview, IL 60025, USA
TEL: 1-847-795-0591
FAX: 1-847-795-0119
Ex ia llC T4 Ga
IECEx KTL 12.0008X
-20℃≤Ta≤+55℃
Product Name
Type
Trademark
KLT Co., Ltd.
597-2, Geumseung-ri, Tanhyeon-myeon, Paju-Si,
Gyeonggi-Do, South Korea
Automatic Single Point Lubricator
Pulsarlube E
E60, E120, E240