عضویت 
ورود اعضا
راهنمای خرید
Leaflet Pulsarlube MSP0 pages
F5i.SfiM.UBE MSP
MSP250/MSP500
Machine Synchronized External Power Unit
Operating Principle
The MSP unit turns "On" or "Off" in synchronization with the machine on which it is installed. It will dispense the preset amount of grease
as long as the machine is operating. If the machine is not operating, then the Pulsarlube MSP unit goes into "stand
by mode" and does not dispense lubrication until the machine operates again. The MSP is an externally powered unit.
The power supply connected to the machine or PLC operates unit. Therefore, there is no need to replace battery. Only grease
pouch will be replaced.
Specification
Item | Description |
Available Model Types | KLT125, KLT250, ML500 and OL500 |
Operating Pressure | 20Kgf/cm2 |
Operating Temperature | -15°C-60°C(5T-140T) |
Max. Lubrication Points | 1 to 8 points (Can be remotely installed) |
Back Up Battery | DC 4.5V(Service Life 5 years). No need to replace the battery with every Service pack change. |
Power Supplier | Select MSP power supply according to Equipment's power Source i.e. Use a VAC Adaptor for AC power, Use a VDC converter for DC power |
Other Specifications | Same as the Pulsarlube M unit |
Power Supply Specification
Items | MSP VAC AC- DC Adapter | MSP VDC DC- DC Converter | ||
Rate Input Power | 100-220V, 50~60Hz | 12V-24V | ||
Rate Output Power | 5.0V, 2A | 5.0V, 2A | ||
LED Lamp to indicate power ON | RED LED | RED LED | ||
Case Size(mm) | 85(D) x 49(W) x 32(H) | 85(D) x49(W)x 32(H) | ||
Wire Length | Power us* | Input | 1M | 1M |
Output | 4.5M | 4.5M | ||
MSP side | 90mm | 90mm | ||
Note: The power supply for the VAC Adaptor and VDC
Converter were designed to fit the Pulsarlube MSP unit
only. Warranty will be void if an unspecified adapter or
converter is used with the MSP unit.
"
