AC Servo Motor Controllers AMC20, AMC21 and AMC220 pages

LD0025-04GB Date: 18-11-04
AC Servo Motor Controllers
AMC20, AMC21
and AMC22
AMC20, 21 and 22 are a series
of AC Servo Controllers which
can be used to control AC
motors rated up to 3kW.
The Controllers are based on a
16-bit microprocessor and 32-
bit signal processor, and are
characterised by great flexibility
for a wide range of control
applications.
The AMC20/22 controllers can
be controlled directly via the
built-in RS232/RS485 interface,
or indirectly via 6 digital inputs.
The Controllers can be directly
connected to PLCs equipped
with controller modules.
They are specially developed
also for use with linear motors,
with or without hall sensor.
Up to 255 units can be connected
to the same RS232/485
bus, and thus a PC or PLC can
function as the controller for a
multi-axis system.
Using JVL´s programming
software, MotoWare32, parameters
such as motor power,
velocity, torque, etc., can be
monitored graphically.
The AMC 20/22 servo controllers
are developed and manufactured
in Denmark.
• Built-in mains noise filter
• EMC tested. CE approved
• Built-in RS232/RS485 Interface
• Simple programming with
MotoWare32
• Facility for graphic monitoring
• High-resolution electronic
gearing
• Can be used for all 3-phase,
rotating and linear AC Servo
Motors rated up to 3kW
• Unique initialization without
hall sensor for no cogging at
start up
• Absolute or relative positioning
• Programmable velocity profiles
• Driver stage 1, 2 or 3kW
• Digital control loop
• Fieldbus for external I/O,
Display etc.
• 11 inputs, 8 outputs
• IGBT PWM sine-commuted
driver
• Short-circuit and thermal
overload protection
• ±10V, pulse/direction inputs
• Versions with JVL-bus,
CANopen, CAM profiles and
automatic program execution
• Compact:
BxHxD:105x265x175mm