WLAN industrial Expansion Module for MAC motors. Type MAC00-EW40 pages
LD0074-02GB Date: 19-7-07
WLAN industrial
Expansion Module for
MAC motors.
Type MAC00-EW4
A range of integrated AC servo motors
makes JVL a world leader within motion
control. The numerous features
of these motors include a modular
concept that makes it extremely easy
to adapt the motors to a very wide
range of applications.
This wireless ethernet module MAC00-
EW4 now makes it possible to use
wireless control of the motors, giving
total freedom of cables.
The module makes it possible to have a
direct WLAN connection to the motor.
Via the WLAN connection, the motor
can be set-up and controlled with the
same possibilities as offered by a serial
connection. Functionality is exactly
as with the MAC00-R4 module, but instead
of the serial connector the EW4
module is equipped with an antenna.
The module can be programmed via
MacTalk. Control is typical from a
mobile phone or a PC. On a PC the
program MacTalk can be used directly,
or commands can be send from your
own program.
The module furthermore has the possibility
for connection of a local zeroset
sensor. Connection of supply and
signals takes place through 3 robust
M12 connectors.
The module has a standard antenna
plug connection, where the included
antenna is connected. Other antennaes
can be connected if required.
Applications:
Positioning of axes.
Supervision of motor.
Parameter setup.
Function
The solution gives full access to all
functions and registers in the MAC
motor.
Baud rates of 19200
Wireless control of the motor
4 In- and 4 Outputs
Programmable via wireless control
with MacTalk
Supports both 802.11b and
802.11b1g standards
Integrated WEB server
No software driver needed
•
•
•
•
•
•
•
•
•
•
•