The QuickStep motor. Step motors with integrated driver MIS231, MIS232, MIS2340 pages

The QuickStep series of Stepper
motors with integrated electronics
represents a major step
forward. All the necessary electronics
in a stepper system are
integrated in the motor itself.
In the past, a traditional motor
system has typically been based
on a central controller unit
located remote from the motor.
This configuration however has
the negative effect that installation
costs are a major part of
the total expense of building
machinery.
The basic idea of the QuickStep
motors is to minimize these
costs but also to make a component
that is much better protected
against electrical noise
The QuickStep motor.
Step motors with integrated
driver MIS231,
MIS232, MIS234
which can be a typical problem
when using long cables between
the controller and motor.
The stepper motor, encoder and
electronics are specially developed
by JVL so that together
they form a closed unit in which
the power driver and controller
are mounted inside the motor
in a closed section.
The advantages of this solution
are:
De-central intelligence.
Simple installation. No
cables between motor and
driver.
EMC safe. Switching noise
remains within motor.
Compact. Does not take
space in cabinet.
••
•
•
12-48VDC power.
Low-cost alternative to
separate step or servo motor
and driver.
Interface possibilities to the
QuickStep motor:
From PC/PLC with serial
commands via RS485.
Pulse/direction input. Encoder
output.
Option for ìPLC built-in
with grafical programming.
CANopen, DeviceNet
8 I/O, 5-28VDC that can be
configured to Inputs, Outputs
or analogue inputs
Future option for Profibus
DP, Ethernet, Bluetooth and
Zigbee wireless
••
•
•
•
••
•
LD0063-13GB Date: 4-2-09