TracHorse - MHP10 pages

TracHorse
SPECIFICATIONS
!"
#t$"!$""t
%&t$"$t
ITEM U.S.A. METRIC
Capacity:
Load Capacity: 1000 lbs 454 kg
Tool Capacity: Hyd Tools Requiring up to 10 gpm (38 lpm) and 2000 psi (138 bar)
Performance:
Travel Speed 2 mph 3.2 km/h
Maximum Grade with Rated Load
Front to Back 60%
Over Side 45%
Hydraulic Tool Circuit: (Dual or Single Available)
Dual Circuit (circuits are combinable) 5 gpm 20 lpm
Single Circuit 8 gpm 30 lpm
Operating Weight 1,290 lbs 585 kg
Engines Available (see order information):
Make/Model Honda GX620 V-TWIN — Briggs & Stratton Vanguard — Ruggerini MD191
Type Air-cooled Gasoline or Diesel
Electrical 12VDC
Start Electric
Drive System:
Type Hydraulic LSHT Motors
Drive Control Two Hand Levers
Throttle Control Hand Lever
Tracks Rubber
Hydraulics:
Hydraulic Pump, type External Gear
System Relief Pressure 2,500 psi 172 bar
Resevoir Capacity 7.7 gal 18 liters
Filtration 10 micron
Misc:
LWA 106.4 db
MHP1
The Stanley TracHorse
is a self-propelled mobile hydraulic
power pack that allows transportation
of tools and equipment in any job site
environment. Simple operating controls
allow for maneuvering in a wide range of
applications. The auxiliary hydraulic tool
circuit is designed for continuous-duty
applications and features the standard
highly efficient cooling found on all
Stanley hydraulic power units.
Features:
• Rugged, compact, mobile all-terrain carrier
for transporting materials and hydraulic tools
• Integrated hydraulic tool circuit
• Singlel circuit delivers 8gpm/30 lpm @2000
psi/140bar
• Dual circuit delivers 2-5gpm/20 lpm or 1-
10gpm / 40 lpm @2000 psi/140bar
• Large lifting eye for easy loading and
unloading
• Self-propelled rubber tracks reduce potential
damage to rail, ties and work site
• Ground pressure 4.4 psi with rated load
• Combines hydraulic power unit with carrier
• Dual controls allow easy operation
• Integral brake holds unit on incline upon
release of controls
• Turns 360º within its own length
• Carries over 1000 lb / 454 kg
• Climbs 60% grade
• Operates wide range of hydraulic tools
• Low hydraulic oil level warning light
• Drive motor hub release for moving when
disabled
• Self-adjusting track tensionor self-cleans
ballast and gravel from track mechanism
• Hydraulic powered tilting bed
• Easily removable side panels for flat bed use
• Optional deep hopper insert
• Highly efficient hydraulic cooling