Rail Drill - RD120 pages

Rail Drill
RD12
SPECIFICATIONS
Features and Benefits
The power of the RD12 when used in
conjunction with our exclusive
indexable carbide tipped bits easily
drills both hardened and standard
rail with the same tool, providing
the lowest cost per hole available on
the market.
Lightweight Aluminum Construction
provides ease of handling, loading
and unloading.
Preset Integrated Water Ports for
accurate and continuous drill
lubrication.
Water coolant eliminates need to
maintain and store costly oils or
chemicals.
Automatic Water Shut-Off when the
spindle is retracted. This feature
conserves water thereby reducing
downtime required to refill the
water tank.
Over-Center Clamp Design provides
quick and easy setup of tool on rail.
Automatic Drill Feed and Spindle
Speed provide greater precision in
drilling.
Tool Rack for holding extra bits and
TorxTM driver provides greater
operator convenience and speed in
setting up the RD12 Rail Drill.
Fast Drilling Speed at 40 seconds or
less per hole increases daily production
while reducing labor costs.
Keyless Chuck requires no tools to
install or remove bits.
Accessory Features and Benefits
Carbide Drill Inserts are four-way
indexable and require no sharpening.
These field-replaceable, disposable
inserts provide up to 300 holes per
bit in standard rail, excellent drill
hole finish, and a reduction in cost
per hole.
Rail Templates can be changed
easily without the use of additional
hand tools.
ITEM U.S.A. METRIC
INPUT FLOW RANGE 8 - 10 gpm 30 - 38 lpm
INPUT PRESSURE 2000 psi 140 bar
MAX. BACK PRESSURE 250 psi 17 bar
WEIGHT 58.5 lbs 26.5 kg
LENGTH 28 in. 71.1 cm
WIDTH 8 in. 20.3 cm
HEIGHT 12 in. 30.5 cm
WATER CAPACITY 2 gallons 7.6 liters
RPM (at 10 gpm / 38 lpm) 900
FEED RATE .0013 in. per revolution .03 mm per revolution
OUTPUT 1.5 in. hole in 40 sec 38 mm hole in 40 sec
CONNECTOR HTMA Flush Faced Coupler
P/N 30993 03/98 1.5M