Hydraulic Post Puller0 pages

Post Puller
OPERATION AND PERFORMANCE
Features and Benefits
The Stanley PP10 Post Puller is
designed to remove flanged type sign
post and irregularly shaped post up to
8-inch/20 cm wide.
It incorporates two methods to solve
your post pulling problems. For flanged
post use the PP10 gripper jaws to grasp
the post on any convenient surface.
Simply position the PP10 with the
flange engaged with the jaws and
actuate the control valve to cycle the
post puller cylinder.
For posts that cannot be gripped by the
jaws, use the enclosed chain to wrap
around the post. Place the chain in the
slots on the post puller frame and cycle
the puller using the control valve.
When pulling perforated post, pins on
the end of the chain may be inserted into
the post to keep the chain from sliding.
The PP10 features an 8-inch/203 cm
stroke and has a pulling force of 9800
lbs/4450 kg at 2000 psi/l40 bar input
pressure. Because the PP10 can handle a
wide range of hydraulic flows it can be
powered by most circuits generating
2000 psi/l40 bar. Circuits generating
less than 2000 psi/l40 bar can be used
but, the available pulling power of the
PP10 will be lowered.
ITEM U.S.A. METRIC
Capacity 8 in. 20 cm
Pulling Force 9800 lbs 4450kg
Weight 70 lbs 31.8 kg
Length 12 - 3/4 in. 32 cm
Width 14 in. 35.5 cm
Height (Retracted) 18-3/4 in. 48 cm
Pressure 2000 psi 140 bar
Flow Range 3-9 gpm 11-34 lpm
Porting 3/8 NPTF
Connect Size and Type 90o EL 3.8 NPTM
P/N 17754 07/98 1.5M
PP10