Core Drill - CD100 pages
Core Drill
Features and Benefits
The Stanley CD10 Core Drill is
well suited for drilling concrete,
masonry and asphalt materials. It
can be operated freehand or
mounted in an optional drill stand.
The CD10 maintains speed
regardless of drill load improving
the life of the bits.
The CD10 has a three-speed
gearbox. this provides a speed
selection to match the best
speeds for the range of drill bits.
Changing speeds is easily done
with the speed selector on the
drill. The gearbox is equipped with
a clutch to protect the gear set
from overload while delivering
torque sufficient for the larger bits.
SPECIFICATIONS
!!
"
# #
$%
##t!
ITEM U.S.A. METRIC
CAPACITY 5/8 to 6-3/8 in. Bits 15 to 160 mm Bits
PERFORMANCE 380, 900 and 1800 rpm
FLOW RANGE 5.8 - 13 gpm 22 - 50 lpm
PRESSURE 1000 - 2000 psi 69 - 140 bar
SPINDLE CONNECTION 1-1/4 UNC male, 1/2 UNC female
SYSTEM TYPE Open Center
WEIGHT 18.7 lbs 8.5 kg
LENGTH 19.3 in. 490 mm
MAX WATER PRESSURE 60 psi 4 bar
CONNECTION 3/8 in. Flush-Face Quick Disconnect Couplers
WATER CONNECTION Gardena Quick Connect Coupler
HOSE WHIPS Yes
Water can be delivered either
from a hydrant connection or from
the 4-gallon pressure tank
accessory. The water connection
on the CD10 is fitted with a valve
so the water can be controlled at
the drill.
A drilling aid is included to assist
in starting freehand drilling without
walk. Once the drill bit is started,
the drilling aid can be moved out
of the way.
The drill stand has leveling
screws to set the stand solidly on
the surface to be drilled.
A saddle clamp is available to
attach the drill stand to concrete
pipe 6 to 24 inches (150 to
600mm) in diameter.
The drill stand can be adjusted to
enable drilling holes at any angle
from perpendicular to 45 degrees.
The drill stand can be anchored to
the material to be drilled by setting
an anchor screw or by using a
vacuum pump.
The trigger can be locked ON to
reduce operator fatigue. The
trigger lock is released by simply
squeezing the trigger.
CD10