panel filter0 pages
(J) filterinfo@mail.donaldson.com ® GTS-europe@emea.donaldson.com © gts-asiapacific@donaldson.com.sg www.donaldson.com
nnnnters
nnnnPocket Filters
nnnnMini-Pleat
nnnnOur mini-pleat panel filter is perfect for gas turbine
nnnnapplications with high velocity air requirements,
nnnnhigh moisture environments, and/or high dust
nnnnsituations. Designed to fit gas turbine air filter
nnnnsystems that use standard
nnnn24x24 " mini-pleat filters.
nnnnMedia: Synthetic
nnnnFrame Dimensions (Norn.):
nnnn24"X 24"/61 Ox 610 mm
nnnnDonaldson offers a pair of synthetic pocket filters
nnnnfor gas turbine filtration that can be used an
nnnnvarious combinations of pre-filter and final filter,
nnnndepending on your cleanliness requirements.
nnnnWith a polymer frame, they are non-corrosive and can
nnnnbe incinerated after use.
nnnnUsed in our new GTM Marine/Offshore Filtration
nnnnSystem (see write-up on page 37), as well as in other
nnnnnon-Donaldson inlet systems.
nnnnPart No.
nnnnMedia
nnnnRating
nnnnASHRAE
nnnnArrestance*
nnnnP03-0204
nnnnG4
nnnn90%
nnnnP03-0257
nnnnF5
nnnn40-60%
nnnnP03-0205
nnnnP03-0256
nnnnF6
nnnn60-80%
nnnnF7
nnnn80-90%
nnnn* See pages 30 & 31 for
nnnnMedia Rating information
nnnnOur "2by4" replacement panel filters let you put
nnnnthe superior quality, performance and technology
nnnnof Donaldson-made filters into an AAF filter system.
nnnnChoose either Duratele™ or Synthetic filter media; both
nnnnhave our exclusive Spider-Web® media treatment.
nnnnSpecifications
nnnn• Dimensions:
nnnn46.4 X 22.1 X 3.25 inches / 1179 x 561 x 83 mm
nnnn• Two-inch deep pleats are held in place with
nnnnhot melt spiral beading inside and outside.
nnnn• Liners: Galvanized expanded metal, 74% open area.
nnnn• Endcaps: Galvanized metal
nnnn• Gasket: Seamless
nnnnPart Numbers_
nnnnP19-1748
nnnnMedia: Synthetic/Spider-Web
nnnnP19-1596
nnnnMedia: Duratek/Spider-Web
nnnn16 Replacement Filters and Spare Parts Catalog
nnnnjgl Donaldson.
nnnnM^Sj Ritrattoti Solutions
"