Cyclone separator Ultradri SG-Z0 pages

GB

Technical Data Sheet
Page 1 of 3

Cyclone separator
Ultradri SG-Z
The steel cyclone separator is designed for the purification of
compressed air and gases, especially for removing free floating
water.

Product description:
The SG-Z cyclone separator was
designed for the purification of air and
other gases in an industrial range of applications. The housings with construction
swirl vane offer, low differential pressures
at high flow rates. The SG-Z is available in
a superplus version, where it will be supplied with an electronically controlled
zeroloss drain.
Between drain and housing a ball valve is
installed.
In this product series 6 different housings
are available ranging from a volume flow
of 1650 to 15000 m3/h (related to 7 bar
(g)).
Features:
The swirl vane starts the compressed air
rotating. Caused by the centrifugal force
the aerosols and particles are retained on
the wall of the filter bowl.
To prevent aerosols from being carried
over from the collecting point, an extra
battle plate is installed.
The SG-Z cyclone seperator conforms to
the requirements of the European directive 87/404/EG for pressure vessels.

Technical Data
Materials:

Surface finish:

Housing

Steel, EC-type
approval

electrically resp.
electronically controlled drain

Plastic and
Aluminium

Polyester resin coating

Connection IN / OUT:
1650-7500

DN 80-DN 200
acc. to DIN 2633

10500-15000

DN 200-DN 300
acc. to DIN 2576

Maximum operating pressure:
1650 - 7500
10500-15000

16 bar
10 bar

Maximum operating temperature:

Retention rate:

+ 1°C / +65°C

99% related to 10 µm

Technical alterations reserved (R04/ 2010/11/30)
Donaldson Filtration Deutschland GmbH · Industrial Filtration Solutions · Büssingstraße 1 · D-42781 Haan · Telefon +49/21 29/569-0 · Telefax +49/21 29/569-100