Sherborne Sensors DTI Series Digital Tilt Indicator0 pages

In North America call toll free: 1-877-486-1766 Fax 1-201-847-1394
Email: nasales@sherbornesensors.com
Rest of World: +44 (0) 870 444 0728 Fax: +44 (0) 870 444 0729
Email sales@sherbornesensors.com website: www.sherbornesensors.com
Data sheet DTI – Iss 1.doc
DTI Series
Digital Tilt Indicators
Features
Front panel conforms to IP65
(NEMA 4)
Flat, slightly recessed display, together
with high-brightness red LED’s ensures
maximum visibility in difficult lighting
conditions
Universal Power Input 90 – 265VAC,
50/60Hz allows world-wide installation
Full set-up via front panel buttons
through a simple, password protected
menu
Complies with European
Electromagnetic Compatibility and
Safety Directives
Four software alarms and two alarm
relays
RS422/485 Interface
Analog voltage output
Advanced mathematical functions
Introduction
The Sherborne Sensors DTI Series is a family of five-digit,
programmable digital panel meters, offering improved tilt
measurement system versatility and performance. The series
is designed to take an output from any Sherborne Sensors
gravity referenced inclinometer, provide necessary
trigonometric conversions, and display the output as an
angle, with a resolution down to 0.001°. For seamless
interface with a data acquisition system, two supplementary
outputs, an analog voltage output and RS422/485 serial
output are supplied. The enclosure is manufactured from
recyclable and flame retardant (VO) materials, with front panel
conformance to IP65: NEMA 4.
Supplied, powerful menu-driven software enables fast and
flexible set-up from the front panel or via serial
communications link. Built-in, comprehensive alarm functions
for the DTI Series makes them particularly suitable for
monitoring, switching and control functions. The hysteresis
facility prevents noisy signals from switching alarms
erroneously, with high and low deviations facilitating control
around a set point. On and off delay times can be set with
individual alarms, configured as latching or non-latching,
depending on user requirements.
The DTI Series may be used with most Sherborne Sensors
gravity-referenced inclinometers, as well as other
manufacturers’ products. An integral 12 VDC power supply is
intended to provide excitation voltage for MEMS- based
inclinometers. Bi-polar voltage supplied inclinometers may be
also powered via Sherborne Sensors XT-0102 or XT-0103
series power supply modules.
Applications
Can be implemented into simple, measurement-only
applications, as well as those requiring digital
communications, alarms, and mathematical functions
Available either as an individual product, or as a fully
calibrated measurement system, with inclinometer
Suitable for use with Sherborne Sensors gravity
referenced inclinometers, as well as other manufacturers’
products.