Sherborne Sensors T435 'L' Series Gravity Referenced Servo Inclinometer with 4-20mA Output0 pages

Schaevitz® T435 ‘L’ Series
DC-Operated, Gravity-Referenced
Servo Inclinometer with 4 to 20mA output
1 Ringway Centre, Edison Road, Basingstoke, Hampshire, RG21 6YH, United Kingdom
Tel: +44 (0) 870 444 0728 Fax: +44 (0) 870 444 0729 Email: sales@sherbornesensors.com
Website: www.sherbornesensors.com
T435 'L' - Iss 3.doc
Features
• Fully self-contained - connect to a DC power
source and a readout or control device for a
complete operating system
• 4-20mA proportional to sine of the angle of tilt
• ±3° to ±90° ranges available
• Extremely rugged, withstands 1500g shock
Applications
• Bore-hole mapping, dam and rock shifts and other
geophysical, seismic and civil engineering studies
• Applications where space is limited
T435 ‘L’
The T435 Series is a high precision closed loop
gravity referenced tilt sensor designed for
down-hole logging or for use where overall space is
limited. Measuring only 61mm high and less than
37mm in diameter, models are available in a variety
of ranges. Solder pin terminations are standard.
The 4-20 mA, output is specifically designed for
electrically noisy environments or where the
inclinometer output signal must travel a long distance.
The inclinometer operates on a single 24 VDC supply
and the output series load resistance can be as high
as 400D. The output current is proportional to the
sine of the tilt angle.