HYGROPHIL H - Process hygrometer - 4230-100 pages

tr.row {}
td.cell {}
div.block {}
div.paragraph {}
.font0 { font:7.00pt "Arial", sans-serif; }
.font1 { font:9.00pt "Arial", sans-serif; }
.font2 { font:13.00pt "Arial", sans-serif; }
.font3 { font:16.00pt "Arial", sans-serif; }
Data sheet
HYGROPHIL H 4230-10 process hygrometer
Continuous humidity measurement in industrial processes.
For very high demands in terms of being resistant to corrosion and dirt. Particularly suitable for cases where the air to be measured contains oil vapours, dust, water-soluble gases, solvents, acids and aggressive chemicals.
The device is certified by the German Technical Inspection Agency (TUV) for the performance of flue gas measurements in accordance with the Federal German Pollution Control Act (BImSchV) (17th Implementing Ordinance).
In many processes, monitoring and controlling gas humidity is a must if you want to achieve a consistently high product quality, use energy efficiently and adhere to the regulations regarding emission limits. HYGROPHIL H 4230 is a special measuring device that continuously measures the humidity levels during industrial processes. Thanks to the carefully chosen materials and constant scavenging, the system is especially suitable for cases where the air to be measured contains oil or fat vapour, solvents, water-soluble gases or salts. Examples:
Hot-air tunnels for cooking
foodstuffs
Fertiliser dryers
Various chemical processes It can even be used in cases where the air to be measured is highly contaminated with acids or other aggressive substances (such as sulphuric acid, hydrofluoric acid or nitrohydrochloric acid). Examples:
Copper-nickel works
Large combustion plants
Combined heating and power
stations
Waste incineration plants
In power stations, incineration plants, and other industrial facilities, the amount of water vapour can also be measured in non-purified flue gas immediately downstream of the filter. This allows you to detect not only pipe damage, but also hairline cracks in the heat exchanger.
The portable design is particularly suitable for mobile application at the facilities of test centres and agencies for monitoring plants and at energy information centres.
Thanks to the standard method used, HYGROPHIL H is also suitable for use as a reference device.
 Measurement range: 0...100 °C DT
Օ Primary measurement variables:
TT, HT, SP, aux. temperature
 Calculated measurement variables:
DT, MH, SH, vol.%, VP, h, DVP
Օ Secondary standard method in accordance with DIN 50012
 1 additional temperature measuring circuit for PT100
Օ Current outputs 2x 0/4...20 mA electrically isolated
 Profibus DP field bus
Օ Certified by the TV for use in accordance with the Federal German Pollution Control Act (BImSchV) (13th and 17th Implementing Ordinances)
BARTEC GmbH ٕ Schulstrafte 30 Postfach 63 Օ D-94239 Gotteszell Telefon +49(0)9929/301-0 Օ Telefax +49(0)9929/301-112
E-Mail: info@go.bartec.de Internet: www.bartec.de