Series 10 Electric Actuator0 pages

Series 10 Electric Actuator
Specifications
Torque: 1,320-26,040 in/lbs.
Voltage: 120 VAC 1Ph 50/60 Hz
Amp Draw: 1.65 – 4.20
Conduit Entry: Two (2) 3/4” FNPT
Max Ambient Temperature: 150º F
Limit Switches: Four (4) single pole,
double throw (4-SPDT)
10 amp rated
Torque Switches: Two (2) single pole,
double throw (4-SPDT)
10 Amp rated
Cycle Time per 90º: 21– 93 seconds

Standard Features
•t Motor: Reversing, squirrel cage induction motor,
115 VAC 50/60 Hz, single phase
•t Overload protection: Integral thermal overload
protection for motor windings with automatic reset
•t Gear train: Permanently lubricated
•t Conduit: Two 3/4” FNPT conduit entries to eliminate
cross feed between control and power signals
•t Declutchable manual override: Lockable de-clutching
lever with handwheel
•t Limit switches: Standard end of travel limit switches
can be used for light indication (not to be used with
PLC for position confirmation)
•t Auxiliary (Additional) limit switches: Each electric
actuator is provided as a standard with two SPDT
auxiliary limit switches
•t Torque Switches: two SPDT torque switches
•t Mechanical Stops: Two +/- 10 percent mechanical
travel stops
•t Enclosure: Weatherproof rated Type 4X and 6
•t AWWA C542: Conforms to AWWA C542
•t Self-Locking: Self-locking worm gear design
eliminates the need for a mechanical brake
•t Space Heater: A space heater is provided as
standard equipment
•t Output torque: Series 10 electric actuators have
an output torque range from 1,320 in./lbs. to
26,040 in./lbs.
• Corrosion resistant mounting: Mounting is with
stainless steel bracket, stainless steel coupling,
and stainless steel hardware
•t Captivated SS socket cap cover screws

184

Sample Specifications
All Series 10 electric actuators shall have a thermally
protected, bidirectional (reversing type), squirrel
cage induction motor with a permanently lubricated
gear train. Actuator shall have self-locking worm
gearing encompassed in a die cast aluminum
housing anodized inside and outside, with an external
polyester powder coat finish, rated Type 4X and 6.
Each actuator shall have a lockable manual override,
visual position indication, two auxiliary limit switches,
two torque switches and a space heater, as supplied
by Asahi/America, Inc.

Options

•t Positioner: 4-20 mA or 0-10 VDC input
•t 4-20 mA output transmitter
•t Two-wire control
•t Voltages: 230/1, 380/3, 460/3, 24 VDC
•tModBus
•t ATEX enclosure
•t Local remote station

ASAHI/AMERICA

Rev. G 6-14