Control system for hot runner moulding systems0 pages

TEMPERATURE CONTROLLER FOR HOT RUNNER MOULDING SYSTEMS
Hot Runner Controls
Mould Temperature Control
Sequential Moulding
Production Monitoring
Parc Industriel Sud - Groissiat
F - 01100 OYONNAX
Tel (33) 04.74.77.34.53
Fax (33) 04.74.73.90.18
e-mail sise@sise.fr
web: www.sise.fr
Standard features :
l SISE unique Permanent Auto-Tuning Software.
l Type J or Type K Thermocouple input.
l Temperature indication in °C or °F.
l Heater Output percentage monitor.
l Triac and load protection by two high speed fuses (15 Amp).
l High and Low temperature alarms separately adjustable.
l Current monitoring.
l Short and reverse thermocouple alarm.
l SoftStart feature (Graduated phase angle control).
Advanced Features :
l Advanced voltage drop control (INCOE Patent).
l Adjustable setpoints limits.
l Automated transfer from Auto to Manual mode
in case of Thermocouple failure (User selectable).
l Intelligent Anti-Arcing system
(Allows safe removal of the controller,
Detects automatically if mainframe is equipped).
l Heater monitoring and alarm (Detects if heater is partly damaged).
l Load protection by built-in relay in case of triac short or error condition.
l Controller locking function (user selectable).
l Selectable controller state on restart.
The SISE ”World Series” is a microprocessor based single zone temperature controller
specially designed for hot runner applications and compatible with all standard mainframes.
The controller features an unique user-friendly ”Click and Rotate” control button,
two Red and Green 3-digit LED displays, and discrete indicators for Manual Mode,
Heating Power and Soft Start mode.
Control Modules NEW !
14.09.07
World Series _ uk.indd