Rapid_Level_RL-G1_Riels0 pages
RL/G1
FLOAT LEVEL LEVEL
RAPID LEVEL RL/G1 WITH 1 FLOAT
Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments
Patented level switches with unique characteristics.
* The required length can be obtained simply by cutting the steel rod,
using an ordinary pipe cutter; or the switching point can be varied by
using a oat with through hole allowing the required liquid control point
to be modied whenever necessary.
* It can be used for dirty liquids, water, petroleum, cutting oils, and tolerates the presence of metal and ferrous particles, since the oat does not
hold a magnet and is integral with the rod.
* One oat can operate just one Reed (min. or max. level), or two Reeds
(min. and empty and extra max. level) thus meeting the most complex
needs.
* Total safety since the electrical part is completely separate in the tank
side and perfectly sealed with respect to the external side by means of
ultrasonic welding and resin coating of the pins.
* The nylon-glass body is very strong and very resistant with respect to
chemicals, and is ideal as an insulating container for the Reed contacts.
* The Rapid Levels come standard with rods suitable for control of a max.
measurement of 500 or 1000mm. To obtain specic measurements, refer
to the table on the next page.
* They can be ordered already arranged for the control of predetermined measurements.
THROUGH FLOAT
On request the oat can be supplied with through hole and therefore be
positioned in the required position without having to cut the rod (which
can therefore be as long as the height of the tank). If necessary, the liquid
control point can be subsequently be modied as required by simply
moving the oat.
Riels Instruments Srl • Tel. +39 049 8961771 • Fax. +39 049 717368 • www.riels.it • info@riels.it
"