Membrane Air Dryers0 pages
DISCLAIMER
The performance characteristics of the products described in this catalog are only examples of measurements and are not guaranteed.
If using our products in operating conditions outside those given in this catalog, determining suitability is the responsibility of the user,
notwithstanding examples of test results or data obtained under similar operating conditions provided by AGC ENGINEERING.
Any material provided by AGC ENGINEERING is for reference only, and application is subject to the user's own judgment and responsibility.
Warranty and Limited Warranty Terms and Conditions
AGC ENGINEERING Co., Ltd. warrants all of its products to be free from defects in materials and workmanship for a period of one year after the date
of delivery, provided the use, installation, application, maintenance, and storage of the products are in accordance with the specications and
description in the instruction manuals and catalogs provided by AGC ENGINEERING.
Under this warranty, the obligation of AGC ENGINEERING to provide compensation for any defect is limited only to repairing or replacing
the defective product at the discretion of AGC ENGINEERING, and only if the defective product is returned unaltered to AGC ENGINEERING and
the defect can be veried by AGC ENGINEERING.
Any claim shall be presented to and processed by AGC ENGINEERING's established claim procedure.
AGC ENGINEERING reserves the right to discontinue manufacturing any products, or to change materials, design, and specications without prior
notice.
Except for the above warranty, AGC ENGINEERING makes no warranties written, expressed or implied.
MEMBRANE TYPE DRYER
Warning to System Designers and End Users
To prevent danger or injury resulting from improper use of our products, system designers and end users must read the following precautions
carefully before designing, installing, and using the system into which our products are being incorporated. All of our products must be designed,
installed, and used to comply with the specications and the description in the instruction manuals and catalogs. System designers and end users
must read the warnings described in the instruction manual shipped with our product carefully. System designers are obliged to provide information
on our products and warnings to end users, to help them properly understand how to use our products safely.
Under certain circumstances, normal operation of a device is prevented by improper use, malfunction, or the device's life span. Users of our
products should take this into consideration in application, intended use, system design, installation, and operation, and should provide an adequate
safeguard to protect life and property even in the event of a malfunction or deterioration of product uid.
In the instruction manual of the system, the system designer should provide all end users with a warning that malfunction is still possible even if
the system is carefully designed.
Under no circumstances should our products be used for life support devices, vehicle control devices, aircraft, or other devices that have
the potential to pose a serious hazard to life and property.
Before attempting to connect, disconnect, replace, or repair our product, all system lines supplying uid or energy to our products must be
shut off or removed. Repair is subject to the procedures previously recommended by AGC ENGINEERING.
Our products are designed for industrial systems. For nonindustrial applications and other applications beyond AGC ENGINEERING specications
with respect to temperature, pressure, ow rate, and uid, please consult your distributor.
The specications published in this catalog are subject to change without notication and the data published in this catalog are for reference
purposes only and do not represent a guarantee of product performance. The formal specication sheets will be submitted on request.
The specications published in this catalog are subject to change without notication and the data published in this catalog are for reference
purposes only and not guarantee of product performance.
The formal specication sheets will be submitted upon request.
Safety Warning
Please be sure to read and observe the cautions printed in the instruction brochures supplied with these products when you use them.
Membrane System Division
WBG Marive West 19F, 2-6 Nakase, Mihama-ku, Chiba-shi, CHIBA 261-7119, JAPAN
Tel: +81-43-350-3378 Fax: +81-43-350-3383
NR August 2011
®
"