SLZ120 pages

DIN Rail Add-On

SLZ10-14
Data sheet

• DIN rail adapter for
S7-300 Simatic rails

SLZ10-14 adapters allow mounting PULS switched mode power supplies or other DIN rail units on the S7-300 rail, which differs from other rails. Thus, a separate DIN rail is not necessary
anymore. The adapter consists of a mounting bracket which is
put onto the S7-300 rail and fixed at the lower edge with two
screws which are included. The DIN rail power supply or any
other device can then be mounted on a DIN rail piece of sufficient length fixed on this mounting bracket. The adapters
are available in various widths for different unit sizes (see table below).

Dimensions and distances

Technical data and scope of delivery
• Thickness of material 1.5mm
• Kind of material

steel plate, passivated in chromatic
acid (zinc coating)

• Scope of delivery

– S7 adapter + DIN rail (mounted)
– Screws

Table of dimensions A...C (mm)
SLZ10

SLZ11

SLZ12

SLZ13

SLZ14

Maximal width of unit

40

50

65

89

120

A

42

51

66

90

121

B

26

35

50

74

105

C

26

36

36

60

86

Order information
Order number

Description

SLZ10
SLZ11
SLZ12
SLZ13
SLZ14

DIN-Rail bracket for S7-300-Simatic-Rail, width of unit max. 40mm
DIN-Rail bracket for S7-300-Simatic-Rail, width of unit max. 50mm
DIN-Rail bracket for S7-300-Simatic-Rail, width of unit max. 65mm
DIN-Rail bracket for S7-300-Simatic-Rail, width of unit max. 89mm
DIN-Rail bracket for S7-300-Simatic-Rail, width of unit max. 120mm

slz10e14 / 071026

1/2