type L0 pages

Pitot tube
Type L
Pitot tube Type L
Pitot tube Type L with TC K
Presentation
KIMO offers a wide range of high-quality and
accurate Pitot tubes, as per the AFNOR NFX
10-112 norm.
Integrated
temperature probe
Pitot tube with ellipsoidal head.
An intake for total pressure and 6 holes
for static pressure.
Body made of stainless steel.
Pitot tube with ellipsoidal head.
An intake for total pressure and 6 holes for
static pressure.
Sheathed thermocouple K probe integrated,
with connection cable length 1,5 m.
Body made of stainless steel.
Features
Norm
Model
Coefficient
Accuracy
Quality
Operating temperature
AFNOR NFX10-112. Annex 4 dated 14.9.77.
This norm meets the requirements of the
International Norm ISO 3966.
NPL curved with ellipsoidal head
1,0015±0,01
Better than 1 %, for a ± 10 ° alignment to the fluid
flow.
stainless steel 316 L
from 0 to 600 °C in standard and up to 1000 °C
in option (except Ø 3 mm).
The extent error of an air velocity or airflow measurement with a
KIMO Pitot tube remains inferior to 2%, when being carried out as
per the NFX10-112 norm.
●
It is recommended to carry out a calibration of the Pitot tube, in order
to determine its exact coefficient.
●
These Pitot tubes, when being connected to a
differential column / or needle / or electronical
manometer, can measure the dynamic
pressure of a moving fluid in a duct, and then
can deduct its air velocity in m/s and its airflow
in m3/h.
These Pitot tubes are used in HVAC field,
vacuum cleaning and pneumatical transport.
They are mainly dedicated to measure hot and
particle-charged air, and also high air velocity.