Analog pressure regulator0 pages
Analog Pressure Regulator
UR-7340(-B)
Model
Seal material*1
M: Metal
Valve state when there is no
electric current
(Normal valve state)
R: Rubber
UR-7350(-B)
M: Metal
R: Rubber
M: Metal
O: Open
C: Closed
Pressure control range
Gauge pressure type: 20 to 950 kPa (G)
10 to 500 kPa (G)
Absolute pressure type: 10 to 300 kPa (A)
Gauge pressure type: 20 to 950 kPa (G)
10 to 500 kPa (G)*2
Absolute pressure type: 10 to 300 kPa (A)
Pressure adjustment valve flow rate
N2 equivalent F.S. flow rate value
Pressure conditions: One-dimensional pressure 50 kPa (G); two-dimensional pressure atmospheric
pressure [1013 hPa (A)]
Under the pressure conditions listed above, 1 LM <0.0032>/5LM <0.016> * < > = Cv values
R: Rubber
M: Metal
R: Rubber
O: Open
C: Closed
Gauge pressure type: 20 to 950 kPa (G)
10 to 500 kPa (G)
Absolute pressure type: 10 to 300 kPa (A)
Gauge pressure type: 10 to 500 kPa (G)
Absolute pressure type: 10 to 300 kPa (A)
Gas
Types of fluids
Pressure conditions: One-dimensional pressure 50 kPa (G); two-dimensional pressure atmospheric pressure
[1013 hPa (A)]
Under the pressure conditions listed above, 10 LM <0.0032> * < > = Cv values
Accuracy
± 1% F.S.
Max. one-dimensional pressure
Gauge pressure type: 1 MPa (G)
Absolute pressure type: 400 kPa (A)
Gauge pressure type: 1 MPa (G)*3
Absolute pressure type: 400 kPa (A)
Gauge pressure type: With 950 kPa (G), 1.5 MPa (G); with 500 kPa (G), 1 MPa (G)
Absolute pressure type: With 300 kPa (A), 450 kPa (G)
Differential pressure
Gauge pressure type: With 500 kPa (G), 1 MPa (G)
Absolute pressure type: With 300 kPa (A), 450 kPa (G)
Metal type: ≤ 5 x 10-12 Pa·m3/s (He); rubber type: ≤ 1 x 10-8 Pa·m3/s (He)
Leak Integrity
5 to 50°C (accuracy guaranteed between 15 to 35°C)
Operating temperature
Standard Fitting
Gauge pressure type: 550 kPa (G)
Absolute pressure type: 400 kPa (A)
Gauge pressure type: 50 kPa (d); absolute pressure type: 100 kPa (d)
Minimum differential pressure
Materials at gas contact area
Gauge pressure type: 1 MPa (G)
Absolute pressure type: 400 kPa (A)
SUS316L
SUS316L, Fluoro rubber
SUS316L
SUS316L, Fluoro rubber
SUS316L
SUS316L, Fluoro rubber
SUS316L
SUS316L, Fluoro rubber
1/4 inch VCR type
Pressure setting signal
0 to 5 VDC (input impedance 1 MÙ or higher)
Pressure output signal
0 to 5 VDC (minimum load resistance 2 kÙ)
Drive power source
+15 VDC ± 0.5V, 50 mA; -15 VDC ± 0.5V, 50 mA (maximum instantaneous power 120 mA)
Mounting orientation
Free
*1 (-B): Provides one-dimensional pressure adjustment (back pressure type). *2 For the (-B) type, only 10 to 500 kPa is supported. *3 For the (-B) type, up to 550 kPa (G).
* Pressure values written within square brackets [ ] are for reference only. NOTE: MO: Metal seal, normally open; RO: Rubber seal, normally open; B: Supports one-dimensional pressure adjustment (back pressure type).
* Internal surface polishing is available for metal seal type models. (A): Absolute pressure; (G): Gauge pressure; (d): Differential pressure
* LM is a symbol indicating gas flow rate (L/min at 25°C, 101.3 kPa).
UR73** Series Web Ver.001
Subject to change with