DC64P Monoblock, 2 x SW600 pages
DC64P Monoblock, 2 x SW60
(Part of the SW60 Series)
The DC64P has been designed for direct current loads, such as motors used on small winches. The DC64P is
a monoblock construction, resulting in a compact design which is compatible with modern electronic control
systems. Devised for both interrupted and uninterrupted loads, the DC64P is suitable for switching Resistive,
Capacitive and Inductive loads.
•t
Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance).
•t
Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).
Application
Interrupted
Uninterrupted
Thermal Current Rating (Ith)
80A
Intermittent Current Rating:
30% Duty
145A
40% Duty
125A
50% Duty
115A
60% Duty
105A
70% Duty
The DC64P has double breaking main contacts with silver alloy
tips, which are weld resistant, hard wearing and have excellent
conductivity. The ‘P type configuration offers greater
environmentally protected switches, compliant to IP66. The
DC64P has M6 main stud terminals and coil connections are by
means of 6.3mm spades.
95A
DC64P
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant:
(in accordance with UL583*)
DC64P
500A at 60V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load:
(in accordance with UL508*)
DC64P
120A at 48V D.C.
Maximum Recommended Contact Voltages (Ue):
DC64P
48V D.C.
Typical Voltage Drop per pole
across New Contacts at 80A
<40mV
Mechanical M.T.B.F
>3 x 106
Coil Voltage Available (Us)
From 6 to 130V D.C.
Coil Power Dissipation:
Highly Intermittent Rated Types
14 - 21 Watts
Intermittently Rated types
10 - 14 Watts
Prolonged Rated Types
7 - 10 Watts
Continuously Rated Types
5 - 7 Watts
Maximum Pull-In Voltage (Coil at 20˚ C) Guideline:
60% Us
60% Us
60% Us
66% Us
10 - 25%
Typical Drop-Out Time (N/O Contacts to Open):
6ms
35ms
DC64P
430 gms
Advised Connection Sizes for Maximum Continuous Current
Copper busbar
Cable
Key:
52 mm2 [0.08 inch2]
Contact Performance Key:
Interrupted and
Uninterrupted Current
= Uninterrupted
Note: Where applicable values shown are at 20˚C
* Please check our web site for product UL status
•t
•t
•t
•t
v2-11-12
0
0
50
0
45
0
40
●
●
EE Type (Steel Shroud)
X
Performance data provided should be used as a guide only. Some de-rating or variation
from figures may be necessary according to application.
Thermal current ratings stated are dependant upon the size of conductor being used
For further technical advice email: technical@albrightinternational.com
Albright reserve the right to change data without prior notice
Large Tips
Connection Diagram
P
Contacts
Current (Amperes)
Rated suitable for Application
= Interrupted
35
0
Guideline Contactor Weight:
0
- 40˚C to + 60˚C
Environmentally Protected IP66
0
Operating Ambient Temperature
0
X
Closed Contact Housing
100
3ms
●
Magnetic Latching† (Not fail safe)
30
Typical Contact Bounce Period
300
X
Mounting Brackets
200
8 - 20ms
X
Armature Cap
400
0
With Diode and Resistor
(Subject to resistance value)
500
X
Magnetic Blowouts - High Powered†
25
With Diode Suppression
X
Magnetic Blowouts†
600
20
Without Suppression
X
Auxiliary Contacts - V3
Figures are for guideline
purposes only
700
15ms
Suffix
Auxiliary Contacts
800
Time (Seconds)
Typical Pull-In Time
General
900
0
Drop-Out Voltage Range
DC64P Available Options
DC64P Contactor Performance
0
Continuously Rated Types
(100% Duty Cycle)
15
Prolonged Operation
(Max 90% Duty Cycle)
Dimensions in mm [inches]
10
Intermittently Rated types
(Max 70% Duty Cycle)
50
Highly Intermittent Rated types
(Max 25% Duty Cycle)
X
Textured Tips
X
Silver Plating
X
Coil
AC Rectifier Board (Fitted)
X
Coil Suppression†
○
Flying Leads
X
Manual Override Operation
X
M4 Stud Terminals
○
M5 Terminal Board
X
Vacuum Impregnation
Key: Optional
†
○
Standard
X
●
Not Available
X
Connections become polarity sensitive
Albright International Ltd, Evingar Trading Estate, Ardglen Road, Whitchurch, Hampshire, RG28 +44 UK
Albright International, 125 Red Lion Road, Surbiton, Surrey KT6 7QS, England,Tel: +44 (0) 20 8390 5357, Fax:7BB,(0) 20 8390 1927
Tel: sales@albrightinternational.com or technical@albrightinternational.com Web 890030, Fax: +44 (0)1256 890043
E-mail: +44 (0)1256 893060, Fax: +44 (0)1256 893562, Dedicated Sales Tel: +44 (0)1256 Site: www.albrightinternational.com
E-mail: sales@albrightinternational.com or technical@albrightinternational.com Web Site: www.albrightinternational.com
Copyright © 2010 Albright International Ltd
Copyright © 2012 Albright International LTD
DC64P
"