MAGNETIC0 pages

Motors and control units

on
off

*

P ↑

↑

Magnetic measurement display

Electronic display MA502

Magnetic sensor MS500

This display serves to interpret information from the incremental
MS500 magnetic sensor for distance and angle measurement. The
display parameters are comprehensive and individually programmable. Optionally equipped with serial interface and integrated power
unit.

The information of the magnetic strip is sensed contactlessly. A
connection cable permanently attached to the sensor transmits the
information to the translation module or magnetic display.

Features:
·t High-contrast LCD, dot matrix
·t Integrated translation module for length and angle
·tMeasurement
·t Incremental/reset function
·t Input for reference switch
·t Programmable last value memory
·t Direct input of reference/offset value

Features:
·t Small, compact design of sensor and connector
·t Robust housing
·t Insensitive to dust, shavings, humidity
·t Magnetic strip MB500

Power supply
Display range
Output signal
Output circuit
Velocity
Distance sensor/tape
System of protection
Resolution
Repeating accuracy
Accuracy

Electronic display MA502
24 V DC ± 20%; 230 V AC; 115 V AC
12-digit LCD Dotmatrix
max. 5 m/s
for complete system: IP 40 flush-type: IP 60
0,01 / 0,1 / 1 / 10 mm
± 1 Digit
± (0,05+0,01 x L)mm [L in m]

Magnetic sensor MS500
Mini-DIN 7-pole
see following elektronic
0,1 -2,0 mm
see following elektronic
0,05 mm optional: 0,25 mm (quadruplex evalution) 0,025 mm
see following elektronic
see following elektronic

Code-No.

E 77070

E 77076

Magnetic strip MB500

The magnetic tape consists of a strip polarised at defined intervals, which is firmly connected with a carrier tape. In addition, a magnetically
conducting cover strip made of stainless steel is included in the scope of delivery.
·t Simple mounting by a double-sided Scotch tape
·t High resistance against external influences
Cod