Proportional pressure valves type RZMO-TERS0 pages
www.atos.com
Table F010-1/E
Proportional relief valves type RZMO-TERS, AERS
direct operated, with integral or remote pressure transducer, ISO 4401 size 06
RZMO are poppet type proportional
pressure relief valves, direct operated with
integral or remote pressure transducer,
which provide pressure regulation
proportional to electronic reference signals.
They operate in association with electronic
drivers, see section ,ݘwhich supply the
proportional valve with proper current to
align valve regulation to the reference signal
supplied to the electronic driver.
ᕃ
ᕄ
ᕅ
ᕆ
ᕇ
ᕈ
ᕉ
ᕊ
ᕋ
Valve body
1
They are available in different executions:
• -TERS with integral pressure transducer ܬ
plus digital electronics ܭpreset in closed
loop, featuring improved static and
dynamic performances.
• -AERS as -TERS but without integral
pressure transducer (predisposed for
connection of remote pressure
transducer).
MODEL CODE
Proportional solenoid
Spring
Poppet
Integral pressure transducer
Integral electronics
The system pressure is controlled by the
poppet ,ܫdirectly operated by the
proportional solenoid ܩand the spring .ܪ
RZMO-TERS-PS-010/*
Main connector
The integral electronics ensures factory
presetting, fine functionality plus valve-tovalve interchangeability and simplified
wiring and installation.
Communication connector
Screw for air bleeding
RZMO
- TERS - PS - 010 / 315 /
*
** /
*
Seals material:
omit for NBR (mineral
oil & water glycol)
PE = FPM
Proportional pressure
relief valve size 06
TERS = with integral digital electronics
and pressure transducer
AERS = as TERS but predisposed for
connection of remote pressure
transducer (to be ordered
separately, see tab. G465)
Series number
PS = Serial
BC = CANopen
BP = PROFIBUS-DP
Electronics options, see section :ݜ
I
010 = regulation on port P, discharge in T
100 = 100 bar
210 = 210 bar
315 = 315 bar
350 = 350 bar
2
= current reference input and monitor
(4 ÷ 20 mA) signals
Z = double power supply, enable fault and
monitor signals (12 pin connector)
Pressure range:
Following communication interfaces ܮare
available:
• -PS, Serial communication interface for
configuration, monitoring and firmware
updating trough Atos PL software
• -BC, CANopen interface
• -BP, PROFIBUS DP interface
The valves with -BC and -BP interfaces can
be integrated into a fieldbus communication
network and thus digitally operated by the
machine control unit.
Communication interfaces:
Configuration:
The electronic main connector ܮis fully
interchangeable for -TERS and -AERS
executions. Standard 7 pin connector is
used for power supply, analog input
reference and monitor signals.
12 pin connector is used for option /Z.
The coils are fully plastic encapsulated
(insulation class H), and the valves have
antivibration, antishock and weather-proof
features.
Mounting surface: ISO 4401, size 06
Max flow: 4 l/min
Max pressure: 350 bar.
C = remote pressure transducer with current feedback 4÷20 mA (only for
AERS executions)
ELECTRONIC DRIVERS FOR RZMO
Valve model
-TERS
-AERS
Drivers model
E-RI-TERS
E-RI-AERS
Data sheet
Note: for power supply and communication connector see section
G205
11
F010
"