CoolPoint vortex flow meter for water or corrosives Coolpoint Large Series0 pages
U
N
I
V
E
R
S
A
L
Maximum ow ranges from
Max pressure
Temperature range
®
F L O W
300-600 GPM (1100-2300 LPM)
200 PSI (13 Bar)
32-210°F (2-99°C)
M O N I T O R S
CP 3-4 Inch
™
UNIVERSAL
Flow Monitors
®
CoolPoint
Vortex Shedding
Flowmeter
Coolpoint™ with
Rotatable Enclosure
Description
Instrument Specications
This owmeter is made for water, water/glycol coolant
or low viscosity uids. It has the following features:
• Flow transmitter 4-20 mA
• Solid state relay congureable as alarm set points
or pulse output
• LED digital display
• No moving parts to clog or wear
• Certied CSA and CE
• Optional temperature transmitter
•
Electrical Specications
•
•
•
Input Power: 10 - 30 VDC @ 80 mA
Output: 4-20 mA with 25 pulses per gallon from the
solid state relay
Electrical Connection
Pin Connector (standard)
Pigtails (optional)
Junction Box with terminal strip (optional)
Material Specications
Flow bodies of brass with PVDF sensors and Viton®
seals standard. PEEK sensors used for high temp for
uids above 150° F.
Flow
Visual readout: 3 digit LED, 0.3" digit height
Response time: 7.5 seconds
Deadband for Alarm: 5% of full scale (maximum
ow)
Accuracy: ±2% of full scale (maximum ow)
Repeatability: ±.25% of indicated ow
Turndown (ratio of maximum to minimum): 10:1
• Temperature (CT units only)
Response time: 1.8 seconds
Deadband for Alarm: ±2%
Accuracy: ±1% F.S.
Repeatability: ± .25% of indicated ow
Output: 4 mA @32°F, 20mA @210°F linear
• Pressure
200 PSIG (13 Bar) operating pressure
• General
Fluid temperature limits: 35-150° F (2-66° C)
standard, 150-210° F (66-99° C) optional.
• Back pressure of 10 PSIG required.
(See manual for elevated temperature.)
Enclosure rating: IP 65, Type 1, 3, 4, 12 and 13
• Pipe Connections:
ANSI Class 150 R.F. Flanges
User-Congurable Options
Features that are selectable on 4-20 mA/pulse out
units include:
• Selectable alarm state (N.O. or N.C.)
• Set point or pulse output
• Rotatable control box standard for all units
• Engineering units (GPM, LPM)
Viton® is a registered trademark for DuPont Performance Elastomers.