SN901XP0 pages

SN901XP
XtremePro™ 3¼" Clipped Head Framing Nailer
This well-balanced light weight XP framing nailer packs
plenty of power and won't leave you fatigued at the
end of the day. Drives ring, screw, and smooth-shank
clipped head nails. SENCO XP tools are specifically
engineered for demanding pros and demanding environments. Built with enhanced features and superior
components – SENCO’s XP tools always provide the
best performance and longest life backed by a 5-year
limited warranty.

Specifications

Item# . . . . . . . . . . . . . . . . . . 4Z0001N
Selectable actuation trigger
Reg. Operating Pressure . . . . . 70-120 psi (4.8 - 8.3 bar)
Air Consumption (60 cycles per min.) 5.2 scfm
Air Inlet . . . . . . . . . . . . . . . . . 3/8" NPT
Tool Weight . . . . . . . . . . . . . . 7.8 lbs (3.54 kg)
Height . . . . . . . . . . . . . . . . . . 11.9" (302 mm)
Length . . . . . . . . . . . . . . . . . . 17.3" (440 mm)
Width . . . . . . . . . . . . . . . . . . 4.5" (114 mm)
Fastener Capacity . . . . . . . . . . 83

2

.113-.135

3

3¼

.113-.120
.113 - .120

34°

Fastener Specifications

LIMITED
WARRANTY

Applications

Framing, sheathing, truss building, sub-flooring and
decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and
fencing.

Features and Benefits

• Well balanced, ergonomic design
• Uses less air to drive nails- Highly efficient internal
design
• Dry Fire Lockout
• Reduced jams and mis-feeds - Patented TrueDrive
magazine
• Low profile design fits easily between studs and
joists
• Retractable Rafter Hanger
• Contact or sequential trigger actuation - Patented
drive selector
• 5-year limited warranty

Shank Diameter
Fastener Range
Finish . . . . . . .
Collation . . . . .

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.113” - .135”
2" – 3¼"
Bright Basic, Galv. & Stainless
34˚ angled strip

*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger
fire) operates in the following a sequence - depress the safety
element at the nose of tool against the work surface then pull the
trigger. After each fastener is driven, release the trigger and lift
the tool off the work surface before starting the sequence again.
This trigger is recommended and acceptable for most applications.
Contact Actuation (also known as dual action, bounce or bottom
fire) operates in the following sequence- pull the trigger first and
keep the trigger pulled while moving the tool along the work
surface with a bouncing motion, depressing the safety element at
the nose of the tool against the work surface where the fastener
is to be driven. This trigger is recommended for use by trained
professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all
tools to ensure proper use and safety precautions. For additional
information on trigger systems and how SENCO will save you
time, reduce costs, and increase quality, call our toll-free Action
Line: 800-543-4596, or visit our web site at: www.senco.com.

Safety First. The only way to work. | 800-543-4596 | www.senco.com | ©2013 Senco Brands, Inc.