MWXP0 pages
MWXP
XtremePro™ 16 Gauge Wide Crown Stapler
The MWXP wide crown stapler is lightweight and well
balanced, minimizing operator fatigue, Has excellent power
and speed to handle the most demanding applications.
Specifications
Item# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact actuation trigger
Reg. Operating Pressure. . . . . . . . . . . . . . . .
Air Consumption (60 cycles per min.) . . .
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tool Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fastener Capacity . . . . . . . . . . . . . . . . . . . . . .
120120N
80 -110 psi (4.8 - 8.3 bar)
3.7 scfm
3/8" NPT
6.5 lbs (3 kg)
9.75" (302 mm)
12.5" (384 mm)
4.17" (106 mm)
140+
Fastener Specifications
Staple Gauge . . . . . . . . . . . . . . . . . .
Crown . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . .
Thickness . . . . . . . . . . . . . . . . . . . . . .
Fastener Range . . . . . . . . . . . . . . . .
Finish. . . . . . . . . . . . . . . . . . . . . . . . . .
Collation. . . . . . . . . . . . . . . . . . . . . . .
Applications
For butt joints, lathing, insulation, and belt line attachment
on mobile homes. Felt applications & foam insulation in
building construction. Corrugated carton to skid, furniture
& cabinet frames.
1
•
•
•
•
Length
P
Features and Benefits
¾
⁄
78
1
Five year limited warranty, XtremePro™ designed
High load capacity (140 plus staples)
Special wearplate and hardened safety
EZ-clear™ latch provides quick and easy clearing of
occasional jams
16
1” (25.4 mm)
.062” (1.6 mm)
.055” (1.4 mm)
¾" (19 mm) – 2½" (38 mm)
Galvanized & Stainless
Glued and taped strip
1¼
1½
Item Code
¾
7
⁄8
1
1¼
1½
¾
7
⁄8
1
1¼
1½
¾
1
P11BAB
P12BAB
P13BAB
P15BAB
P17BAB
P11BABB
P12BABB
P13BABB
P15BABB
P17BABB
P11BPE
P13BGBN
Carton
Count
10.0M
10.0M
10.0M
10.0M
10.0M
10.0M
10.0M
10.0M
10.0M
10.0M
10.0M
5.0M
Finish
Galv
Galv
Galv
Galv
Galv
Galv Band Line
Galv Band Line
Galv Band Line
Galv Band Line
Galv Band Line
Standard Galv
Stainless
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates
in the following a sequence - depress the safety element at the nose of tool against
the work surface then pull the trigger. After each fastener is driven, release the trigger
and lift the tool o the work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in
the following sequence- pull the trigger first and keep the trigger pulled while
moving the tool along the work surface with a bouncing motion, depressing the safety
element at the nose of the tool against the work surface where the fastener is to be
driven. This trigger is recommended for use by trained professionals only in high
production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions. For additional information on trigger systems and
how SENCO will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 800-543-4596 to find your nearest Authorized Senco Dealer, Distributor or
visit our web site at: www.senco.com
www.senco.com
©2009 by SENCO Brands™, Inc.
"