FramePro6010 pages
FramePro®601
3½” Clipped Head 34° Framing/Sheating Nailer
This clipped head nailer provides all the important
features you want at an affordable price. Its compact
design mades it easy to handle, and easy on the arm.
The 34˚ short, in-line magazines provide excellent
maneuverability and line of sight. A powerful framer
that drives a wide range of fasteners in three gauges
(.120, .113, .131) from 2" to 3½ to handle virually any
job.
Specifications
Item# . . . . . . . . . . . . . . . . . . 1G0101N
Selectable actuation trigger
Reg. Operating Pressure . . . . . 70-120 psi (4.8 - 8.3 bar)
Air Consumption (60 cycles per min.) 10 scfm
Air Inlet . . . . . . . . . . . . . . . . . 3/8" NPT
Tool Weight . . . . . . . . . . . . . . 8 lbs (3.62kg)
Height . . . . . . . . . . . . . . . . . . 13.5" (343mm)
Length . . . . . . . . . . . . . . . . . . 15.13" (384mm)
Width . . . . . . . . . . . . . . . . . . 4.17" (106mm)
Fastener Capacity . . . . . . . . . . 70
2
.113-.131
3
3½
.113-.120
.113 - .120
34°
Fastener Specifications
LIMITED
WARRANTY
Applications
Framing, sheathing, truss building, sub-flooring and
decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and
fencing.
Features and Benefits
• Selectable trigger actuation
• Sawtooth safety that digs in for precision
toenailing
• Shorter, straight-line 34˚ magazine for better line
of sight and superior maneuverability
• Reliable internal design with full round driver
• Tool-free adjustable exhaust
• Well-balance and powerful
• Tool-free adjustable depth-of-drive control
• Soft comfort grip handle reduces fatigue
Shank Diameter
Fastener Range
Finish . . . . . . .
Collation . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.113”, .120“, .131”
. 2" – 3½"
. Bright Basic, Galv. & Stainless
. 34˚ angled taped strip
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger
fire) operates in the following a sequence - depress the safety
element at the nose of tool against the work surface then pull the
trigger. After each fastener is driven, release the trigger and lift
the tool off the work surface before starting the sequence again.
This trigger is recommended and acceptable for most applications.
Contact Actuation (also known as dual action, bounce or bottom
fire) operates in the following sequence- pull the trigger first and
keep the trigger pulled while moving the tool along the work
surface with a bouncing motion, depressing the safety element at
the nose of the tool against the work surface where the fastener
is to be driven. This trigger is recommended for use by trained
professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all
tools to ensure proper use and safety precautions. For additional
information on trigger systems and how SENCO will save you
time, reduce costs, and increase quality, call our toll-free Action
Line: 800-543-4596, or visit our web site at: www.senco.com.
Safety First. The only way to work.
www.senco.com
©2012 Senco Brands, Inc.
"