01-TT Ultrasonic Portable Test Tool0 pages
Ultrasonic Portable Test Tool
Product Data Sheet
FGD_PDS_01-TT_Ultrasonic_Portable_Test_Tool
November 2014
Ultrasonic Portable Test Tool
01-TT
The 01-TT ultrasonic test tool is a portable, battery
operated source of ultrasound for periodic testing
of the Incus ultrasonic gas leak detector. The test
tool produces ultrasound to verify response of an
ultrasonic gas leak detector without the need for an
open gas release. The unit is suitable for use in nonhazardous (de-classified) areas or may be used in a
hazardous area with the appropriate permits.
Direct contact with detector not essential for mostt
installations
Minimizes requirement for scaffolding or extension t
t pole mounts
Preset time elapse ultrasound emissions based on t
t typical system alarm delays
Designed for onsite use: portable, battery powered, t
t easy to carry and transport
Test unit health status monitored
01-TT
Specifications
Table 1 - 01-TT Product Details
Range
8 meters (greater distances are achievable depending on ultrasonic background noise)
Alignment
±5 °C 01-TT to detector face
Indications
Low battery, Charging, Fully charged, Battery healthy
Battery Life
24 hours continuous use – Standby: approximately three months
Electrical Ratings
Universal Battery Charger Input Voltage: 110 Vac/230 Vac 50/60 Hz
Charging Requirements
8 hour standard charge using – Charge temperature ambient 0 °C to +40 °C
Environmental
Operating temperature: -20 °C to +60 °C – Storage temperature: -20 to 70 °C
Ingress Protection
IP66 when not in use, IP65 in operation
Instrument Dimensions
277 x 130 x 177 mm – Weight 2.5 kg
Carry Case Dimensions
460 x 330 x 160 mm – Weight 5 kg including 01-TT
Certifications/Approvals
EMC Directive and Low Voltage Directive
EMC Emission EN 50081-1 (1992) Generic emission standard. Part 1: Residential, commercial and light industry.
EN 50081-2 (1993) Generic emission standard. Part 2: Industrial environment
EMC Immunity EN 50082-1 (1997) Generic immunity standard. Part 1: Residential, commercial and light industry.
EN 61000-6-2 (1999)