TWIN ROD SLIDE UNIT SERIES 62000 pages
>p/ Series 6200 Twin rod slide units
nnnnGeneral
nnnnTWIN ROD SLIDE UNITS SERIES 6200 AND 6210
nnnnThe 6200 series twin-rod linear guide units are wide cylinders used in manipulation applications and
nnnnare characterised by their high force output thanks to their double piston design.
nnnnBores range from 10mm to 32mm diameter, with sintered bronze bearings for standard applications
nnnnand linear ball bearings for more rugged applications.
nnnnOne major characteristic of these cylinders is the precision of their anti-rotational design, with the
nnnnpossibility of regulating the stroke to within 0.5mm.
nnnnWhen using magnetic sensors, the 1580 series sensor sits entirely within the extrusion, resulting in a
nnnnsmooth profile.
nnnnThe ranges of the guide units in the 6210 series, between the twin-rod cylinder makes provision fora
nnnnsimple yoke, the twin-rod version passes through a double yoke or "sledge" between the diameters of
nnnn10-15and25mm.
nnnnThanks to the twin rod, double yoke design of the 6210 series, it is possible to either fix the body and use
nnnnthe ends of the rods, or alternatively to fix the rod ends and use the body as the moving part. The
nnnncylinder can be piped through the body orthrough the rods depending on the application.
nnnnStroke limiting screws are fitted at either end of the stroke. The substitution of these screws with shock
nnnnabsorbers makes it possible to use the cylinder on higher velocity applications (up to 500mm/sec.)
nnnnSlots are provided along the edge of these units to accommodate 1580 series miniature sensors
"