CYLINDERS SERIES 1319 ÷ 13210 pages

"

Series 1319-1321

nnnn

Cylinders according to standard

nnnn

ISO 15552 - VDMA 24562

nnnn

General

nnnn

This series of pneumatic cylinders is manufactured according to ISO 6431 standards adapted to VDMA 24562

nnnn

and CNOMO/AFNOR 49003 that guarantee the interchangeability of the cylinders even without mounted

nnnn

anchoring.

nnnn

It differs from the 1300 and 1303 series mainly due to the different pitch of the mounting holes on the end plates

nnnn

and of the barrel made of anodized and shaped aluminium; the tie rods have been eliminated for bores from 32

nnnn

to 125 mm and the end covers are mounted directly on the barrel with special male/female screws, while for

nnnn

bore 160 and 200 mm it is still used the tie rods going through the barrel fixing holes.

nnnn

The barrel is extruded on the inside to guarantee precision with low friction; oxydation hardens the sliding

nnnn

surface of the seals allowing work even without lubrication.

nnnn

The magnetic piston can be mounted to activate the limit switch with Reed contact and all types of anchorings

nnnn

are available according to ISO-VDMA standards, that can be fixed to the end plates with socket head screws.

nnnn

To order single acting cylinders (up to 0 125, 50 mm maximum stroke), add to the code of the chosen cylinder

nnnn

abréviation MA forthe front spring and MPforthe rear spring.

nnnn

For example: 1320.32.50.01 MA

nnnn

1320.50.25.01 MP

nnnn

Construction characteristics

nnnn

End plates

nnnn

Rod

nnnn

from 032 to 0125: UNI 5079 aluminium alloy casting painted black bycataphoresis

nnnn

from 0160 to 0200: UNI 3051 aluminium chilled painted black bycataphoresis

nnnn

Chromed AISI303 stainless steel or C43 chromed steel

nnnn

Barrel

nnnn

Aluminium alloy, anodized 25 micron Ra = 0,3H-0,5

nnnn

Cushion bushings

nnnn

Hardened aluminium

nnnn

Rod-guide bushing

nnnn

Self-lubricating sintered bronze

nnnn

Piston Vulcanized NBR 80 shore rubber monobloc on steel core with

nnnn

incorporated plastoferrite permanent magnet. NBR 80 shore

nnnn

rubber monobloc on without magnet for the non magnetic version

nnnn

plus rear spacer

nnnn

VITON® monobloc for high temperature, available on request

nnnn

for magnetic and non magnetic cylinder

nnnn

Piston rod and

nnnn

cushion seals

nnnn

Self-lubricating 90 shore mixing polyurethane

nnnn

(VITON® on request for high temperature)

nnnn

Other seals

nnnn

RubberNBR80 shore

nnnn

Cushion adjustment screws Nickel-plated steel

nnnn

Technical characteristics

nnnn

Fluid

nnnn

filtered and preferably lubricated air

nnnn

Pressure

nnnn

10 bar

nnnn

Operating temperature

nnnn

-5°CH-+70oC(VITON®, 150°C)

nnnn

Bore

nnnn

Cushioning length

nnnn

0 32 - 40 - 50 - 63

nnnn

mm 28 - 32 - 32 - 40

nnnn

80_ - 100 - 125 - 160 - 200

nnnn

44 - 50 - 55 - 55 - 55

nnnn

"Attention: Dry air must be used for application below Q°C"

nnnn

Standard strokes (for all diameters) Stroke tollerance (ISO 15552)

nnnn

from 0 up to150, every 25 mm

nnnn

over 150 up to 500, every 50 mm

nnnn

over 500 up to 1000, every 100 mm

nnnn

Bore	Stroke	Tollerance
32 - 40 - 50	up to 500	+2 0
	over 500 up to 1250	+3,2 0
63 -80 - 100	up to 500	+2,5 0
	over 500 up to 1250	+4 0
125 - 160-200	up to 500	+4 0
	over 500 up to 1250	+5 0

"