MicroVantage PDA & PDH Series0 pages
MicroVantage™ PDA and
PDH Series
Absolute-Rated and High Efficiency Polypropylene Depth Filter Cartridges
•t Ideal for critical applications requiring economical absolute
or high efficiency filtration
•t Absolute (99.9%) and high efficiency (90%) retention ratings
from 0.5 to 75 microns
•t Multiple zone gradient density fixed pore structure –
maximizes dirt holding capacity and provides true clarifying
filtration
•t Fixed pore structure with high void volume – optimizes onstream service life
•t Microfibers thermally bonded to rigid center core – provides
greater stability under higher temperatures and differential
pressures
•t PDA Series are lot traceable - comes with certificate of
conformance
•t 100% polypropylene construction – meets FDA requirements
•t All components meet USP Class VI criteria for use in
pharmaceutical applications
•t Free of surfactants, binders and adhesives
•t Available in standard lengths and end cap configurations –
fits most filter housings
Applications
RO Prefiltersttt
Plating Solutionsttt
Chemicalsttt
Water & Wastewatertt
Specifications & Operating Conditions
Food & Beverage
Microelectronics
Paint/Inks
Cosmeticst
Pore Sizes
Recommended Change-out Differential Pressure
Nominal Lengths
Steam Sterilization
0.5, 1.0, 3.0, 5.0, 10.0, 20.0, 50.0, 75.0 microns
35 psid (2.4 bar)
9.75", 10", 19.5", 20", 29.25", 30", 40"
Shelco’s PDA single open end style filters may be autoclaved
under no end load conditions for 30 minutes at 121° C. Filters
should be cooled at normal operating temperatures prior to use.
Materials of Construction
Filter Media: Polypropylene
Core / End caps: Thermally bonded polypropylene
Gaskets/O-rings
FDA Compliance
Silicone, Buna N, EPR, Viton, Teflon Encapsulated Viton (O-rings
only) and Santoprene (direct bond gaskets)
PDA and PDH products are manufactured of pure polypropylene
materials with no additives or other manufacturing agents. All
materials used in the production of these cartridges meet the
requirements of FDA Title 21 of The Code of Federal Regulations
174.5 and 177.1520.
www.shelco.com