MicroVantage MPA Series0 pages

MicroVantage™ MPA Series
Absolute-Rated (99.98%) Pleated Polypropylene Filter Cartridges
•tAbsolute-Rated Beta 5000 (99.98%) retention efficiency
•t5.6 square feet (0.52 m2) of media surface area per 10” length
- High throughput and particle retention
- Optimal performance and value
•t100% polypropylene construction offers wide range of
t chemical compatibility
•tRigid, molded cage provides greater structural integrity
•tGradient, fixed pore structure increases dirt-holding capacity t
t and resists unloading under high differential pressure
•tManufactured in state-of-the-art white room for high purity
•tComplies with Food & Drug Administration’s CFR criteria for t t
t food & beverage contact
•tMeets USP Class VI Biological Test for plastics
•tVarious end cap configurations available to fit existing housings
•tProduced in continuous lengths up to 40 inches
Applications
RO Prefilterst
Process Watert t
Plating Solutionst t
Chemicalst
Water & Wastewatert
Food & Beverage
Bottled Water
Microelectronics
Paint/Inks
Cosmeticst
Specifications & Operating Parameters
Pore Sizes 0.2, 0.45, 1.0, 3.0, 5.0, 10.0, 20.0, 30.0, 40.0, 50.0 microns
Maximum Operating Temperature 176°F ( 80°C)
Nominal Lengths 9.75" (24.7 cm), 10" (25.4 cm), 20" (50.8 cm),
Recommended Change-out Differential Pressure
Outside Diameter 2.67" (6.78 cm)
Maximum Differential (Collapse) Pressure
30" (76.2 cm), 40" (101.6 cm)
75 psid @ 70°F (5.2 bar @21°C), 40 psid @176°F (2.8 bar @ 80° C)
Inside Diameter 1.0" (2.54 cm)
Media Surface Area 5.6 sq. ft. (0.52 m2) per ten inches in length
Gaskets/O-rings
Silicone, Buna N, EPR, Viton, Teflon Encapsulated Viton
(o-rings only)
Materials of Construction
Filter Media: t
Outer Cage / Core / End Caps:t
Polypropylene
Polypropylene
35 psid (2.4 bar)
Sanitization and Sterilization
Hot water at 175°F (80°C) at 5 psid for 30 minutes
In-line steam at 257°F (125°C) @ 1 psid (0.07 bar) for 30 minutes
Autoclavable at 257°F (125°C) for 30 minutes
FDA and USP Compliance
All filters are manufactured of virgin polypropylene materials.
All materials comply with FDA requirements for food contact per
CFR Title 21 174.5, 177.1520 and 177.1630. All Components meet
USP Class VI Plastics biological reactivity tests.
www.shelco.com